Phantom-48v injector hat
ssosik·phantom-48v-injector-hat
About the Phantom-48v injector hat
Phantom-48v injector hat is an open source PCB design by ssosik, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 65 × 44.8 mm, with 40 components from 30 distinct parts.
Other key parts include the LT8362EMSE-PBF. By type, the board carries 18 capacitors, 11 resistors, 4 connectors, 3 inductors, 2 diodes and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
P48 phantom-power injection HAT for Raspberry Pi 4B + HiFiBerry DAC2 ADC Pro + ESP P93 microphone preamplifier (phantom-mode variant).
A Raspberry Pi add-on board that generates +48V phantom power from the Pi's 5V GPIO rail and injects it onto two balanced microphone lines feeding a HiFiBerry DAC2 ADC Pro. It was designed for a stereo wildlife-recording rig (Pi 4B + HiFiBerry + ESP P93 preamps with Primo EM272 capsules) but works for any pair of P48 mics into that ADC.
See DESIGN_DOC.md for the full rationale: why it's non-isolated, why 400 kHz, resistor matching and CMRR, layout strategy, and hand-assembly and first-power procedures.

Main components on the Phantom-48v injector hat
Phantom-48v injector hat bill of materials (BOM)
40 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT8362EMSE-PBF | MSE_16A_ADI | U1 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Top_Bottom | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | SW_SPST | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | SS26S | D_SMA | D1 |
| 1 | Green LED 3mm | LED_D3.0mm | D2 |
| 1 | FerriteBead | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | 22 µH | L_Coilcraft_XAL5030-XXX | L1 |
| 1 | 2.2 µH | L_Wuerth_HCI-7040 | L2 |
| 1 | 10 µF / 16V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1 µF / 25V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1 µF / 100V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1 nF X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 22 nF X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 22 µF / 16V X7R | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C6 |
| 3 | 0.1 µF / 100V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C10, C11 |
| 1 | 4.7 µF / 50V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 10 µF / 100V X7R | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9 |
| 1 | 4.7 pF C0G | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 2.2 µF / 100V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15, C16 |
| 1 | 1 µF / 10V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 100 nF / 10V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 1 MΩ 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 34.8 kΩ 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 121 kΩ 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 22.1 kΩ 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 2 | 100 kΩ 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R11 |
| 4 | 6.81 kΩ 0.1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9 |
| 1 | 12 kΩ 1/4W | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
Phantom-48v injector hat design files
The KiCad project lives in the ssosik/phantom-48v-injector-hat repository on GitHub; these links point at the commit this page was built from.
Phantom-48v injector hat: common questions
How big is the Phantom-48v injector hat?
The Phantom-48v injector hat measures 65 × 44.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Phantom-48v injector hat?
40 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Phantom-48v injector hat design files?
From the ssosik/phantom-48v-injector-hat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Phantom-48v injector hat design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which ssosik chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979