Cheese intro board
ssr-cheese·cheese-intro-board
About the Cheese intro board
Cheese intro board is an open source PCB design by ssr-cheese, published on GitHub. It is a 2-layer board measuring 96.5 × 63.5 mm, with 63 components from 39 distinct parts.
Other key parts include the R-78E3.3-0.5, SLA7073MPRT, 7SEGMENT_CA, NJM2742D and NJU7072D. By type, the board carries 26 resistors, 11 capacitors, 8 connectors, 5 ICs, 5 diodes and 2 transistors.
It belongs with the robotics & motion designs in this gallery.
From the project
Cheese introduction board data for Micromouse using Stepper motor with STM32F405RG

Main components on the Cheese intro board
Cheese intro board bill of materials (BOM)
63 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R-78E3.3-0.5 | Pin_Header_Angled_1x03_Pitch2.54mm | U1 |
| 1 | SLA7073MPRT | SLA7073 | U2 |
| 1 | 7SEGMENT_CA | 7SegmentLED_LTS6760_LTS6780 | U3 |
| 1 | NJM2742D | DIP-8_W7.62mm | U4 |
| 1 | NJU7072D | DIP-8_W7.62mm | U5 |
| 1 | 2SJ681 | TO-220-3_Vertical | Q1 |
| 1 | 2SK2796L | TO-220-3_Vertical | Q2 |
| 1 | Jack-DC | BARREL_JACK | J1 |
| 1 | Battery | JST_XH_B02B-XH-A_02x2.50mm_Straight | J2 |
| 1 | Conn_01x05 | Pin_Header_Straight_1x05_Pitch2.54mm | J3 |
| 1 | Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | Conn_01x06 | JST_XH_S06B-XH-A_06x2.50mm_Angled | J5 |
| 1 | AE-AQM0802 | Pin_Header_Straight_1x05_Pitch2.54mm | J6 |
| 1 | CN2 | Pin_Header_Straight_2x13_Pitch2.54mm | J7 |
| 1 | CN1 | Pin_Header_Straight_2x13_Pitch2.54mm | J8 |
| 1 | Polyfuse | Fuse_TE5_Littlefuse-395Series | F1 |
| 1 | Jumper_3_Bridged12 | Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | Speaker | BUZZER | LS1 |
| 1 | SW_SPST | Pin_Header_Straight_1x03_Pitch2.54mm | SW2 |
| 1 | SW_DPST_x2 | SW_PUSH_6mm_h4.3mm | SW3 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 1 | VSLY5850 | LED_D5.0mm | D4 |
| 1 | SFH213FA | LED_D5.0mm | D6 |
| 1 | 100u | INDUCTOR_V | L1 |
| 1 | 1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 5 | 0.1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C7, C8, C11 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 10u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5 |
| 1 | 100u | CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 0.01u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C9 |
| 1 | 22p | C_Disc_D3.0mm_W1.6mm_P2.50mm | C10 |
| 1 | 3.3k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 14 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R7, R8, R10, R12, R13, R15, R16 +6 |
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R6, R11, R14 |
| 1 | 510 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 2 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R25 |
| 2 | 10 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R23 |
| 1 | 33 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 1 | 220k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R26 |
Cheese intro board design files
The KiCad project lives in the ssr-cheese/cheese-intro-board repository on GitHub; these links point at the commit this page was built from.
- LayoutCheeseUnua.kicad_pcb
Cheese intro board: common questions
How big is the Cheese intro board?
The Cheese intro board measures 96.5 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cheese intro board?
63 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cheese intro board design files?
From the ssr-cheese/cheese-intro-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cheese intro board design in my own project?
The repository has no license, so all rights stay with ssr-cheese. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979