WLED-driver
St-Evenxiii·WLED-driver·pcb/wled_driver.kicad_pcb
About the WLED-driver PCB
WLED-driver is an open source PCB design by St-Evenxiii, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 8 components from 7 distinct parts.
Other key parts include the 74LS125. By type, the board carries 4 connectors, 2 capacitors, 1 IC and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
I basic led driver to run a 16x16 led matrix with WLED
This project contains the KiCad design files and a test sketch for a custom driver board designed to run WLED on a 16x16 5V LED matrix using an ESP32-WROOM-32D 38-pin DevKit board.
1. Launch KiCad and open the project file: pcb/wleddriver.kicadpro. 2. Open the PCB Editor. The components are already laid out and ready for routing. 3. If KiCad 9 prompts you to convert the file format, click Yes to upgrade the .kicadpcb file to version 9. 4. To view the schematic: You can import the netlist (wleddriver.net) into a new KiCad Schematic if you desire a visual representation, or simply work from…
Main components on the WLED-driver
WLED-driver bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS125 | DIP-14_W7.62mm | U1 |
| 2 | Conn_01x19 | PinSocket_1x19_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Conn_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J4 |
| 1 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
WLED-driver design files
The KiCad project lives in the St-Evenxiii/WLED-driver repository on GitHub; these links point at the commit this page was built from.
WLED-driver: common questions
How big is the WLED-driver PCB?
The WLED-driver measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WLED-driver?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the WLED-driver design files?
From the St-Evenxiii/WLED-driver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WLED-driver design in my own project?
The repository has no license, so all rights stay with St-Evenxiii. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k