86 open source boards using the 74LS125
Real designs built with the 74LS125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687STM32
Bldc control ver3
pekkaroi
98 × 38 mm61 parts2LGPL-2.0199Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051IBMExtender
schlae
203.2 × 105.4 mm43 parts4LNo license32- schematic only · 84 parts
Commodore-PC10-III-Reproduction
Board-Folk
84 partsNo license27 - schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 ISA DualUARTParport
hkzlab
176.5 × 90.2 mm69 parts2LCC-BY-NC-4.018CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17STM32
STLinkForm
grumat
73.7 × 38.1 mm65 parts2LGPL-2.015STM32
MVCU F407
Vaaarad07
132.9 × 108.4 mm100 parts4LMIT10ESP32
Mega65-r3-expansion board.
MEGA65
215 × 126.9 mm102 parts4LNo license7CD32-to-A500-gamepad
CRG-Glen
129.3 × 40.4 mm27 parts2LCERN-OHL-P-2.06AVR/Arduino
Videopaccart
bwack
99.6 × 101.5 mm23 parts2LNo license6CP297s
Danjovic
155.1 × 156 mm127 parts2LGPL-3.04Rl78-flash programmer
prabhu-yu
119.9 × 24.9 mm22 parts2LNo license4- schematic only · 207 parts
DeskPro386 16
breadboardinglabs
207 partsMIT4 AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02Z80-SOUND
dennis9819
160 × 100.3 mm104 parts2LNo license2C64NIKI2
ibaldachini
58.4 × 84.8 mm27 parts2LNo license2AVR/Arduino
C128DKEYBOARD
danwerner21
437.8 × 127.8 mm119 parts2LNo license1STM32
C152ThrottleQuadrant
bkryza
140 × 85 mm62 parts2LNo license1ESP32
SYSMATT-WS2812-MATRIX-CARRIER
sysmatt
162 × 162 mm28 parts2LGPL-3.01Easy-Add on-Projects for-Amstrad-CPC
BrettHallen
53 × 38 mm21 parts2LNo license1OSI-600D-SuperBoard-II
Bambelweeny57
301.5 × 367.4 mm292 parts2LNo license0Snark barker
Vakon84
231.1 × 106.7 mm193 parts2LNo license0Snark barker mini
computerguy096
103.7 × 78.5 mm175 parts4LCC-BY-SA-4.00Valhalla MOD XVR(4IO)
csdexter
99.6 × 99.6 mm128 parts2LGPL-3.00SBC 8080 ECB
sladek
160.5 × 100.2 mm111 parts2LNo license0Hekla
WiggisModular
67 × 100 mm101 parts2LNo license0286
TomasPavlovicPavlo
168.2 × 94.4 mm73 parts2LNo license04mb mapper nms8280
iricryst
102.2 × 68.2 mm28 parts2LNo license04mb mapper
iricryst
102.2 × 68.2 mm28 parts2LNo license0Kicad demo xilinx
circuitly
80.4 × 43.2 mm25 parts2LNo license0WLED-driver
St-Evenxiii
50 × 80 mm8 parts2LNo license0- schematic only · 27 parts
4bit-CPU
nordinMunteanu
27 partsGPL-3.00 AVR/Arduino
Keyboard
danwerner21
282.7 × 108.3 mm57 parts2LNo license50
How designs wire the 74LS125
Read from the KiCad layouts of 53 open source designs, one per repository: what each pin of the 74LS125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 25 of 53 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 92% | — |
| VCCpin 14 | Connected to: VCC 93% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Bldc control ver3 by pekkaroi, Sonde xilinx by claynicholson and Smart Reciver Max Exp Pico by computergeek1507.
The 74LS125 in open source designs
The gallery holds 86 open source boards using the 74LS125 from 58 GitHub repositories; a typical one measures about 125.7 × 84.8 mm and carries around 42 components.
79% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the 74LS125
Microcontrollers on boards using the 74LS125
What boards using the 74LS125 are built for
74LS125: common questions
Where can I find a 74LS125 reference design?
Each of the 86 boards on this page is a real design using the 74LS125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS125 VCC pin?
The VCC pin has a decoupling capacitor on 25 of 53 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 53 open source designs using the 74LS125.
What parts are used alongside the 74LS125?
The 74LS245, 74LS138, 74LS08, 74LS04 and 74LS244 appear in the most repositories here.
Which microcontrollers do boards using the 74LS125 use?
Most are built on AVR/Arduino (10), STM32 (6), ESP32 (4) and RP2040/RP2350 (3).
How big is a typical board using the 74LS125?
The median is 125.7 × 84.8 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74LS125?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the 74LS125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.