Wash
Stab-Rabbit-coding·SecureControllers·kicad/Wash/kicads/Wash.kicad_pcb
About the Wash PCB
Wash is an open source PCB design by Stab-Rabbit-coding, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 55 × 35 mm, with 19 components from 16 distinct parts.
By type, the board carries 2 crystals, 1 transformer and 1 inductor.
From the project
unmanned system controllers with security baked in
This directory holds the KiCad projects for the four cape/board types:
Per-board net/pin documentation lives in the matching .md files (Wash.md, TACCO.md, FlightEngineer.md, XCVR-49MHZ-2.md). KiCad files keep KiCad board coordinates (documented exception to the hull-frame standard, see root CLAUDE.md).
A pass was made to wire in a second Ethernet channel and to clear the Design-Rule-Check (DRC) and ratsnest issues introduced by a manual component rearrangement. This section records exactly what landed and what is still open, so the thread can be picked up cleanly.
Wash bill of materials (BOM)
19 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7nF X2Y | X2Y_Cap_4T_0402 | X2Y-CAN, X2Y-RS485 |
| 1 | DS26LV31 | SOIC-16_3.9x9.9mm_P1.27mm | 1553-DRV |
| 1 | DS26LV32 | SOIC-16_3.9x9.9mm_P1.27mm | 1553-RCV |
| 1 | SM-1553-11 | Package | 1553-XFM |
| 1 | SRF2012-100Y | Bourns_SRF2012_4T | CMC-RS485 |
| 2 | JST-GH-4P-ETH | JST_GH_4P | ETH1, ETH2 |
| 2 | ADIN1300BCPZ | QFN-48-1EP_7x7mm_P0.5mm_EP5.65x5.65mm | ETH1-PHY, ETH2-PHY |
| 1 | JST-GH-4P-1553 | JST_GH_4P | MIL-1553 |
| 1 | PB2I-P1-2x18 | 2x18_P1_Socket | PB2-P1 |
| 1 | PB2I-P2-2x18 | 2x18_P2_Socket | PB2-P2 |
| 1 | ADM2795EBRWZ | SOIC-20W_7.5x12.8mm_P1.27mm | RS485 |
| 1 | JST-GH-4P-RS485 | JST_GH_4P | RS-485 |
| 1 | 749010012A | ETH_XFMR_8P_5x3.5mm | T-ETH2 |
| 1 | SMAJ33CA | DO-214AC_SMA | TVS-1553 |
| 1 | PRTR5V0U2X | SOT-363_SC-88 | TVS-RS485 |
| 1 | 742792512 | C_0805_2012Metric | FB1 |
Wash design files
The KiCad project lives in the Stab-Rabbit-coding/SecureControllers repository on GitHub; these links point at the commit this page was built from.
Wash: common questions
How big is the Wash PCB?
The Wash measures 55 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Wash?
19 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wash design files?
From the Stab-Rabbit-coding/SecureControllers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wash design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Stab-Rabbit-coding chose for the repository.