XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver
Stab-Rabbit-coding·SecureControllers·kicad/Emma/kicads/Emma.kicad_pcb
About the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver PCB
XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver is an open source PCB design by Stab-Rabbit-coding, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 55 × 35 mm, with 36 components from 36 distinct parts.
Other key parts include the 100nF +3V3 U1-VDDA Bypass and 100nF +3V3 U1-VDD Bypass. By type, the board carries 3 inductors, 3 capacitors, 2 ICs and 1 switch.
It belongs with the rf & radio designs in this gallery.
From the project
unmanned system controllers with security baked in
This directory holds the KiCad projects for the four cape/board types:
Per-board net/pin documentation lives in the matching .md files (Wash.md, TACCO.md, FlightEngineer.md, XCVR-49MHZ-2.md). KiCad files keep KiCad board coordinates (documented exception to the hull-frame standard, see root CLAUDE.md).
A pass was made to wire in a second Ethernet channel and to clear the Design-Rule-Check (DRC) and ratsnest issues introduced by a manual component rearrangement. This section records exactly what landed and what is still open, so the thread can be picked up cleanly.
Main components on the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver
XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver bill of materials (BOM)
36 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF +3V3 U1-VDDA Bypass | C_0402_1005Metric | U1 ByA |
| 1 | 100nF +3V3 U1-VDD Bypass | C_0402_1005Metric | U1 ByB |
| 1 | 10nF RX RC Bandpass 1200Hz Cap | C_0402_1005Metric | 1.2k C |
| 1 | 13k Ohm RX RC Bandpass 1200Hz | R_0402_1005Metric | 1.2k R |
| 1 | 10nF RX RC Bandpass 2200Hz Cap | C_0402_1005Metric | 2.2k C |
| 1 | 7.2k Ohm RX RC Bandpass 2200Hz | R_0402_1005Metric | 2.2k R |
| 1 | Si5351A-B-GT 49MHz DDS I2C Synthesiser | MSOP-10_3x3mm_P0.5mm | 49M DDS |
| 1 | 10nF C0G 0402 +3V3 VHF 49MHz Bypass | C_0402_1005Metric | +3V 10n |
| 1 | 10uF X5R 0805 +3V3 Mid-freq | C_0805_2012Metric | +3V 10u |
| 1 | 100nF X7R 0402 +3V3 HF Bypass | C_0402_1005Metric | +3V 100n |
| 1 | 100uF 10V X5R 1210 +3V3 Bulk | C_1210_3225Metric | +3V 100u |
| 1 | 100nF X7R 0402 +5V HF Bypass | C_0402_1005Metric | +5V 100n |
| 1 | 100uF 10V X5R 1210 +5V Bulk | C_1210_3225Metric | +5V 100u |
| 1 | 742792512 | C_0805_2012Metric | +5V Bead |
| 1 | 4.7nF_X2Y_C0G | C_0402_1005Metric | GND X2Y |
| 1 | SN74LVC1G04 SOT-23-5 3.3V UART_RX_F->SBUS_OUT | SOT-23-5 | INV1 |
| 1 | MCP1703T-3302 LDO 3.3V 72dB-PSRR@100kHz | SOT-23-5 | LDO 3V3 |
| 1 | SN74LVC1G157 SC-70-6 2:1MUX UART/SBUS Select | SOT-363_SC-70-6 | MUX1 |
| 1 | 2N3866 NPN BJT PA Class-AB Final 100mW | SOT-89-3 | PA 100mW |
| 1 | 1nF U3B Collector RF Bypass | C_0402_1005Metric | PA By2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100pF DDS-RF Coupling Cap to U3A | C_0402_1005Metric | PA Cb1 |
| 1 | 100pF PA Interstage Bypass | C_0402_1005Metric | PA Cb2 |
| 1 | 10k Ohm U3A Base Bias Resistor | R_0402_1005Metric | PA Rb1 |
| 1 | 1k Ohm U3B Base Bias Resistor | R_0402_1005Metric | PA Rb2 |
| 1 | 100 Ohm U3A Collector Load | R_0402_1005Metric | PA Rc1 |
| 1 | PB2I-P1-2x18 | 2x18_P1_Socket | PB2-P1 |
| 1 | PB2I-P2-2x18 | 2x18_P2_Socket | PB2-P2 |
| 1 | 10nF C0G 0402 GND-PGND Moat Bridge | C_0402_1005Metric | PGND 10n |
| 1 | SPST-SMD OPEN=UART CLOSED=SBUS | SW_SPST_SMD_2Pin | S1 |
| 1 | TG2520SMN 25MHz TCXO ±0.5ppm | Oscillator_SMD_SeikoEpson_TG2520SMN-xxx-xxxxxx-4Pin_2.5x2.0mm | TCXO 25M |
| 1 | 100nH Coilcraft-0805HQ-101J LPF Series-1 | L_0805_2012Metric | L1 100n |
| 1 | 180nH Coilcraft-0805HQ-181J LPF Series-2 | L_0805_2012Metric | L2 180n |
| 1 | 180nH Coilcraft-0805HQ-181J LPF Series-3 | L_0805_2012Metric | L3 180n |
| 1 | 120pF C0G LPF Shunt-1 | C_0402_1005Metric | C1 120p |
| 1 | 180pF C0G LPF Shunt-2 | C_0402_1005Metric | C2 180p |
| 1 | 120pF C0G LPF Shunt-3 | C_0402_1005Metric | C3 120p |
XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver design files
The KiCad project lives in the Stab-Rabbit-coding/SecureControllers repository on GitHub; these links point at the commit this page was built from.
XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver: common questions
How big is the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver PCB?
The XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver measures 55 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver?
36 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver design files?
From the Stab-Rabbit-coding/SecureControllers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Stab-Rabbit-coding chose for the repository.
More boards in SecureControllers
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568