TACCO

Stab-Rabbit-coding·SecureControllers·kicad/Zoë/kicads/Zoë.kicad_pcb

TACCO PCB layout, top view — open source board by Stab-Rabbit-coding

About the TACCO PCB

TACCO is an open source PCB design by Stab-Rabbit-coding, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 55 × 35 mm, with 18 components from 15 distinct parts.

By type, the board carries 2 crystals, 1 transformer and 1 inductor.

From the project

unmanned system controllers with security baked in

This directory holds the KiCad projects for the four cape/board types:

Per-board net/pin documentation lives in the matching .md files (Wash.md, TACCO.md, FlightEngineer.md, XCVR-49MHZ-2.md). KiCad files keep KiCad board coordinates (documented exception to the hull-frame standard, see root CLAUDE.md).

A pass was made to wire in a second Ethernet channel and to clear the Design-Rule-Check (DRC) and ratsnest issues introduced by a manual component rearrangement. This section records exactly what landed and what is still open, so the thread can be picked up cleanly.

TACCO bill of materials (BOM)

18 components, 15 distinct parts.

QtyPartRefs
2
4.7nF X2Y
X2Y-CAN, X2Y-RS485
1
DS26LV31
1553-DRV
1
DS26LV32
1553-RCV
1
SM-1553-11
1553-XFM
1
SRF2012-100Y
CMC-RS485
1
JST-GH-4P-1553
MIL-1553
2
PB2I-P1-2x18
PB2-P1, PB2-P1-TOP
2
PB2I-P2-2x18
PB2-P2, PB2-P2-TOP
1
PCA9685
PWM-I2C
1
ADM2795EBRWZ
RS485
1
JST-GH-4P-RS485
RS-485
1
749010012A
T-ETH1
1
SMAJ33CA
TVS-1553
1
PRTR5V0U2X
TVS-RS485
1
742792512
FB1

TACCO design files

The KiCad project lives in the Stab-Rabbit-coding/SecureControllers repository on GitHub; these links point at the commit this page was built from.

TACCO: common questions

How big is the TACCO PCB?

The TACCO measures 55 × 35 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TACCO?

18 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the TACCO design files?

From the Stab-Rabbit-coding/SecureControllers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TACCO design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which Stab-Rabbit-coding chose for the repository.

More boards in SecureControllers