ENC-NACELLE-1 / SKIPPER-TILT-ENC
About the ENC-NACELLE-1 / SKIPPER-TILT-ENC PCB
ENC-NACELLE-1 / SKIPPER-TILT-ENC is an open source PCB design by Stab-Rabbit-coding, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 7 × 14 mm, with 4 components from 4 distinct parts.
Other key parts include the AK7455. By type, the board carries 2 capacitors, 1 IC and 1 connector.
From the project
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
This directory holds the KiCad projects for the four cape/board types:
Per-board net/pin documentation lives in the matching .md files (Pilot.md, TACCO.md, FlightEngineer.md, XCVR-49MHZ-2.md). KiCad files keep KiCad board coordinates (documented exception to the hull-frame standard, see root AGENTS.md).
A pass was made to wire in a second Ethernet channel and to clear the Design-Rule-Check (DRC) and ratsnest issues introduced by a manual component rearrangement. This section records exactly what landed and what is still open, so the thread can be picked up cleanly.
Main components on the ENC-NACELLE-1 / SKIPPER-TILT-ENC
ENC-NACELLE-1 / SKIPPER-TILT-ENC bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AK7455 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | PIGTAIL_7W | Pigtail_7W_DirectSolder | P1 |
| 1 | 100nF | C_0402_1005Metric | C1 |
| 1 | 1uF | C_0402_1005Metric | C2 |
ENC-NACELLE-1 / SKIPPER-TILT-ENC design files
The KiCad project lives in the Stab-Rabbit-coding/Serenity-UAV repository on GitHub; these links point at the commit this page was built from.
ENC-NACELLE-1 / SKIPPER-TILT-ENC: common questions
How big is the ENC-NACELLE-1 / SKIPPER-TILT-ENC PCB?
The ENC-NACELLE-1 / SKIPPER-TILT-ENC measures 7 × 14 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the ENC-NACELLE-1 / SKIPPER-TILT-ENC?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ENC-NACELLE-1 / SKIPPER-TILT-ENC design files?
From the Stab-Rabbit-coding/Serenity-UAV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ENC-NACELLE-1 / SKIPPER-TILT-ENC design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which Stab-Rabbit-coding chose for the repository.
More boards in Serenity-UAV
Flight Engineer — Power Distribution Board
90 × 65 mm115 parts4LCERN-OHL-W-2.01
TACCO — Comms / Logging / Payload Cape
55 × 35 mm108 parts6LCERN-OHL-W-2.01
Pilot — EMI-Hardened Flight Control & Sensor Cape
55 × 35 mm96 parts6LCERN-OHL-W-2.01
Observer
69.9 × 56.4 mm43 parts4LCERN-OHL-W-2.01
XCVR-49MHZ-2 EMI-Hardened 49 MHz AX.25 KISS Transceiver
55 × 35 mm41 parts4LCERN-OHL-W-2.01
CAN-PERIPH-GW-1 / MAL-CAN-PERIPH-GW
64.3 × 19.5 mm39 parts2LCERN-OHL-W-2.01