Btctestv0
Starman3787·btc-split-flap·hardware/electronics/teststm/btctestv0/btctestv0.kicad_pcb
About the Btctestv0 PCB
Btctestv0 is an open source STM32 PCB design by Starman3787, published on GitHub under the MIT license. It is a 2-layer board measuring 81.3 × 69.9 mm, with 13 components from 5 distinct parts.
Its main chip is the STM32F767ZITx, from the STM32 family. Other key parts include the A1363xKTTN-1, MIC5353-3.3YMT, GL2576-5.0TA5R and Pololu_Breakout_A4988. By type, the board carries 8 ICs and 5 modules.
It belongs with the displays & leds designs in this gallery.
From the project
Project to display the value of bitcoin on a split-flap display.
Main components on the Btctestv0
Btctestv0 bill of materials (BOM)
13 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | A1363xKTTN-1 | Allegro_SIP-4 | U1, U2, U3, U4, U5 |
| 1 | STM32F767ZITx | LQFP-144_20x20mm_P0.5mm | U6 |
| 1 | MIC5353-3.3YMT | MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm | U7 |
| 1 | GL2576-5.0TA5R | TO-263-5_TabPin3 | U8 |
| 5 | Pololu_Breakout_A4988 | Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3, A4, A5 |
Btctestv0 design files
The KiCad project lives in the Starman3787/btc-split-flap repository on GitHub; these links point at the commit this page was built from.
Btctestv0: common questions
What microcontroller does the Btctestv0 use?
The Btctestv0 is built around the STM32F767ZITx, from the STM32 family.
How big is the Btctestv0 PCB?
The Btctestv0 measures 81.3 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Btctestv0?
13 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Btctestv0 design files?
From the Starman3787/btc-split-flap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Btctestv0 design in my own project?
Yes, under the terms of its MIT license, which Starman3787 chose for the repository.
Can I test firmware for the Btctestv0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in btc-split-flap
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k