CarControllerV3

Stefanhg·CarControllerV3·PCB/CarControllerV3/CarControllerV3.kicad_pcb

CarControllerV3 PCB layout, top view — open source STM32 board by Stefanhg

About the CarControllerV3 PCB

CarControllerV3 is an open source STM32 PCB design by Stefanhg, published on GitHub. It is a 4-layer board measuring 209 × 100 mm, with 233 components from 54 distinct parts.

Its main chip is the STM32C092RCT6, from the STM32 family. Other key parts include the TCAN3404DRBRQ1, AMS1117-3.3, ULN2003APW, PC817X1NIP1B and AP62200Z6-7. By type, the board carries 71 test points, 56 resistors, 34 capacitors, 14 connectors, 13 diodes and 12 ICs.

From the project

Kewet/Buddy CarController unofficial V3

This project is the open source CarController V3, A controller for Kewet and Buddy electric cars. Goal is to move the core functions of the old CarController into a new system and design expansion modules you can use via CAN bus to add new functionality to your car.

Software will expose as many of the functionalities as possible via CAN bus to allow other devices to control the car and make decisions based on the information provided by the CarController.

CarControllerV3, from the project README
From the project README

Main components on the CarControllerV3

CarControllerV3 bill of materials (BOM)

233 components, 54 distinct parts.

QtyPartRefs
1
TCAN3404DRBRQ1
IC2
1
AMS1117-3.3
Advanced Monolithic Systems
U9
1
ULN2003APW
U10
5
PC817X1NIP1B
SHARP
U11, U12, U13, U15, U16
1
AP62200Z6-7
U17
1
STM32C092RCT6
U18
1
USBLC6-2P6
U19
1
CP2102N-A01-GQFN20R
Silicon Labs
U22
3
BC847BHZGT116
Q1, Q3, Q5
1
BC857B
Q4
1
16MHz
Y1
5
649012227222
J1, J2, J3, J4, J5
1
2x16
J6
1
USB_C_Receptacle
J11
4
Conn_01x04
J12, J15, J16, J17
1
2x5
J14
2
Conn_01x12
J18, J19
2
1A
F1, F2
1
100mA
F3
7
22R
FL1, FL2, FL13, FL19, FL20, FL21, FL42
Show 34 more
QtyPartRefs
2
~
H1, H2
7
3.2mm
H3, H4, H5, H6, H7, H9, H10
5
RT424005
REL1, REL2, REL3, REL4, REL5
1
PESD2CAN_215
Nexperia
S3
2
FSM4LPATR
S4, S5
71
TP_B1_6
TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 +63
1
SS54B
D1
1
1N4007W-T
D2
1
N.M.
D3
8
1N4148W-7-F
D4, D5, D6, D7, D8, D10, D11, D12
2
Green
D9, D13
1
4.7uH
L4
14
CC0603KRX7R0BB104
100n
Yageo
C1, C4, C6, C19, C25, C28, C32, C36 +6
4
CC0603KRX7R0BB101
100p
Yageo
C2, C3, C5, C11
1
CC0603KRX5R8BB475
4.7u
Yageo
C7
6
CC0805KRX5R8BB106
10u
Yageo
C8, C9, C10, C15, C16, C17
6
CC0603KRX7R0BB103
10n
Yageo
C43, C44, C61, C62, C63, C64
2
CC0603KRNPO9BN120
12p
Yageo
C55, C56
1
CC0603KRX7R9BB105
1u
Yageo
C68
4
RC1206FR-0722KL
22K
Yageo
R1, R2, R6, R7
5
N.M.
Yageo
R3, R4, R27, R28, R29
5
RC0603FR-07100KL
100K
Yageo
R5, R11, R25, R35, R92
8
RC0603FR-07100RL
100R
Yageo
R8, R13, R15, R16, R24, R32, R54, R63
11
RC0603FR-071KL
1K
Yageo
R9, R22, R23, R36, R37, R38, R39, R40 +3
2
RC0603FR-072K7L
2.7K
Yageo
R10, R17
6
RC0603FR-0710KL
10K
Yageo
R12, R53, R60, R91, R93, R96
1
N.M.
Yageo
R14
2
RC0603FR-077K5L
7.5K
Yageo
R18, R21
2
RC0603FR-0739KL
39K
Yageo
R19, R20
1
RC0603FR-070RL
0R
Yageo
R26
1
RC0603FR-07120RL
120R
Yageo
R33
2
RC0603FR-075K1L
5.1K
Yageo
R48, R57
2
RC0603FR-0722RL
22R
Yageo
R58, R59
4
RC0603FR-0733KL
33K
Yageo
R64, R90, R94, R95

CarControllerV3 design files

The KiCad project lives in the Stefanhg/CarControllerV3 repository on GitHub; these links point at the commit this page was built from.

CarControllerV3: common questions

What microcontroller does the CarControllerV3 use?

The CarControllerV3 is built around the STM32C092RCT6, from the STM32 family.

How big is the CarControllerV3 PCB?

The CarControllerV3 measures 209 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the CarControllerV3?

233 components, from 54 distinct parts. The full bill of materials is listed on this page.

Where can I download the CarControllerV3 design files?

From the Stefanhg/CarControllerV3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CarControllerV3 design in my own project?

The repository has no license, so all rights stay with Stefanhg. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CarControllerV3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in CarControllerV3

Similar boards