BMS CAN MOD V1RA
Stefanhg·CarControllerV3·Modules/BMS_CAN_MOD/V1RA/BMS_CAN_MOD_V1RA/BMS_CAN_MOD_V1RA.kicad_pcb

About the BMS CAN MOD V1RA PCB
BMS CAN MOD V1RA is an open source STM32 PCB design by Stefanhg, published on GitHub. It is a 4-layer board, with 26 components from 19 distinct parts.
Its main chip is the STM32C092RCT6, from the STM32 family. Other key parts include the TCAN3404DRBRQ1, SN65HVD75DGK, ISO7721DR and AMS1117-3.3. By type, the board carries 10 capacitors, 6 ICs, 3 resistors, 2 connectors, 1 crystal and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Kewet/Buddy CarController unofficial V3
This project is the open source CarController V3, A controller for Kewet and Buddy electric cars. Goal is to move the core functions of the old CarController into a new system and design expansion modules you can use via CAN bus to add new functionality to your car.
Software will expose as many of the functionalities as possible via CAN bus to allow other devices to control the car and make decisions based on the information provided by the CarController.
Main components on the BMS CAN MOD V1RA
BMS CAN MOD V1RA bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCAN3404DRBRQ1 | SON65P300X300X100-9N-D | IC1 |
| 1 | SN65HVD75DGK | TVSP8 | U1 |
| 2 | ISO7721DR | SOIC127P599X175-8N | U2, U3 |
| 1 | AMS1117-3.3 | SOT229P700X180-4N | U8 |
| 1 | STM32C092RCT6 | LQFP64_STM-L | U18 |
| 1 | 16MHz | XTAL_ECS-160-12-33Q-JES-TR | Y1 |
| 2 | B4B-PH-K-S | JST_B4B-PH-K-S | J8, J9 |
| 1 | ACT45B-220-2P-TL003 | FIL_ACT45B-220-2P-TL003 | FL1 |
| 1 | RFM-0505S | CONV_RFM-0505S | PS1 |
| 1 | PESD2CAN_215 | IC_PESD2CAN_215 | S1 |
| 1 | 47uH | IND_LQH44NN470K03L | L1 |
| 2 | 10uF | CC0805KKX5R8BB106-CAPC2013X145N | C5, C7 |
| 1 | 100n | CAPC1608X90 | C8 |
| 2 | 2.2n 2kV | C1206X222KGRACTU-CAP3216X125N | C9, C10 |
| 1 | CC0603KRX5R8BB475 4.7u Yageo | CC0603-CAPC1608X90N | C11 |
| 2 | CC0603KRX7R0BB104 100n Yageo | CC0603-CAPC1608X90N | C32, C57 |
| 2 | CC0603KRNPO9BN120 12p Yageo | CAPC1608X90 | C55, C56 |
| 2 | RC0603FR-07100RL 100R Yageo | RC0603FR-RESC1608X60N | R1, R2 |
| 1 | 10K | RC0603FR-RESC1608X60N | R56 |
BMS CAN MOD V1RA design files
The KiCad project lives in the Stefanhg/CarControllerV3 repository on GitHub; these links point at the commit this page was built from.
BMS CAN MOD V1RA: common questions
What microcontroller does the BMS CAN MOD V1RA use?
The BMS CAN MOD V1RA is built around the STM32C092RCT6, from the STM32 family.
How big is the BMS CAN MOD V1RA PCB?
The BMS CAN MOD V1RA has 4 copper layers and is 1.6 mm thick.
How many components are on the BMS CAN MOD V1RA?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the BMS CAN MOD V1RA design files?
From the Stefanhg/CarControllerV3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BMS CAN MOD V1RA design in my own project?
The repository has no license, so all rights stay with Stefanhg. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BMS CAN MOD V1RA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in CarControllerV3
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k