6 open source boards using the ISO7721DR
Real designs built with the ISO7721DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
HALPI2-hardware
hatlabs
187 × 109 mm541 parts6LCustom license9ESP32
Clean room slave
trieuhuyduc
165 × 110 mm207 parts2LNo license1STM32
OSBAMS Rev2 RC1
hle12345
100 × 90 mm115 parts4LMIT0Sdc ntc emulator
bl1ndc4m3l
104 × 76 mm54 parts2LCustom license0STM32
NMEA2000Adapter-8.1
peterantypas
46 × 46 mm52 parts2LGPL-3.0446- schematic only · 26 partsSTM32
BMS CAN MOD V1RA
Stefanhg
26 parts4LNo license0
How designs wire the ISO7721DR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ISO7721DR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VDD2 pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
- The VOB pin has a series resistor on 2 of 4 designs, most often 0 Ω (then 1 kΩ).
- The VIA pin has a series resistor on 2 of 4 designs, most often 0 Ω (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD1pin 1 | Connected to: 3.3V 100% |
|
| GND1pin 4 | Connected to: GND 80% · a signal 20% | — |
| GND2pin 5 | Connected to: GND 100% | — |
| VOBpin 6 | Connected to: Signal 100% |
|
| VIApin 7 | Connected to: Signal 100% |
|
| VDD2pin 8 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NMEA2000Adapter-8.1 by peterantypas, HALPI2-hardware by hatlabs, Clean room slave by trieuhuyduc and Sdc ntc emulator by bl1ndc4m3l.
The ISO7721DR in open source designs
The gallery holds 6 open source boards using the ISO7721DR from 6 GitHub repositories; a typical one measures about 104 × 90 mm and carries around 85 components.
50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is NMEA2000Adapter-8.1 by peterantypas.
Microcontrollers on boards using the ISO7721DR
What boards using the ISO7721DR are built for
ISO7721DR: common questions
Where can I find a ISO7721DR reference design?
Each of the 6 boards on this page is a real design using the ISO7721DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ISO7721DR VDD1 pin?
The VDD1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ISO7721DR.
What decoupling capacitors do designs use on the ISO7721DR VDD2 pin?
The VDD2 pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ISO7721DR.
What resistor goes on the ISO7721DR VOB pin?
The VOB pin has a series resistor on 2 of 4 designs, most often 0 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the ISO7721DR.
Which microcontrollers do boards using the ISO7721DR use?
Most are built on STM32 (3), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the ISO7721DR?
The median is 104 × 90 mm, and 50% are two-layer designs.
What is the most popular open source board using the ISO7721DR?
By GitHub stars, NMEA2000Adapter-8.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the ISO7721DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.