Backlighting
stefanofinetti·MF_A320_Glareshield·Backlighting_Dimmer/Backlighting_PCB.kicad_pcb
About the Backlighting PCB
Backlighting is an open source PCB design by stefanofinetti, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 43.3 × 55 mm, with 15 components from 12 distinct parts.
Other key parts include the NE555P. By type, the board carries 5 connectors, 4 capacitors, 2 diodes, 2 resistors, 1 IC and 1 transistor.
From the project
Complete project for the MobiFlight FCU/EFIS Mainboard
This repository contains the complete glareshield unit: the FCU in the centre and the two EFIS control panels either side, driven by MobiFlight. The two outer side panels are not built — three rarely used buttons did not justify the plastic.
The unit sits on a desk, is powered by its own mains adapter and connects to the PC over USB, so it can be unplugged and moved.
Main components on the Backlighting
Backlighting bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P Texas Instruments | DIP-8_W7.62mm | U1 |
| 1 | IRLIZ44N | TO-220F-3_Vertical | Q1 |
| 3 | BOARD_CONN | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J12, J13, J14 |
| 1 | Backlighting POT | PinHeader_1x03_P2.54mm_Vertical | J31 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J32 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 470nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 10nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3 |
| 1 | 10uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Backlighting design files
The KiCad project lives in the stefanofinetti/MF_A320_Glareshield repository on GitHub; these links point at the commit this page was built from.
Backlighting: common questions
How big is the Backlighting PCB?
The Backlighting measures 43.3 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Backlighting?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Backlighting design files?
From the stefanofinetti/MF_A320_Glareshield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Backlighting design in my own project?
Yes, under the terms of its GPL-3.0 license, which stefanofinetti chose for the repository.
More boards in MF_A320_Glareshield
AVR/Arduino
FCU Mainboard v3
stefanofinetti
270 × 100 mm136 parts2LGPL-3.009V Distribution
stefanofinetti
70 × 80 mm25 parts2LGPL-3.00KorryLargePCB SMD
stefanofinetti
32.8 × 32 mm7 parts2LGPL-3.00KorrySmallPCB SMD
stefanofinetti
22 × 36.7 mm7 parts2LGPL-3.00Backlighting LEDModule
stefanofinetti
32.3 × 55 mm3 parts2LGPL-3.00