FCU Mainboard v3

stefanofinetti·MF_A320_Glareshield·Mainboard/FCU_Mainboard_v3.kicad_pcb

FCU Mainboard v3 PCB layout, top view — open source AVR/Arduino board by stefanofinetti

About the FCU Mainboard v3 PCB

FCU Mainboard v3 is an open source AVR/Arduino PCB design by stefanofinetti, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 270 × 100 mm, with 136 components from 86 distinct parts.

Its main chip is the ATMega2560, from the AVR/Arduino family. Other key parts include the CD74HC4067M, CH340G, AMS1117-3.3 and TPS2115A. By type, the board carries 63 connectors, 32 resistors, 27 capacitors, 8 ICs, 1 jumper and 1 switch.

From the project

Complete project for the MobiFlight FCU/EFIS Mainboard

This repository contains the complete glareshield unit: the FCU in the centre and the two EFIS control panels either side, driven by MobiFlight. The two outer side panels are not built — three rarely used buttons did not justify the plastic.

The unit sits on a desk, is powered by its own mains adapter and connects to the PC over USB, so it can be unplugged and moved.

Main components on the FCU Mainboard v3

FCU Mainboard v3 bill of materials (BOM)

136 components, 86 distinct parts.

QtyPartRefs
4
CD74HC4067M
U1, U2, U3, U4
1
ATMega2560
U5
1
CH340G
U6
1
AMS1117-3.3
U7
1
TPS2115A
U8
1
R_OLED
J1
1
L_OLED
J2
1
SPD_OLED
J3
1
HDG_OLED
J4
1
H_T_OLED
J5
1
APPR
J6
1
EXPED
J7
1
LOC
J8
1
A/THR
J9
1
AP2
J10
1
AP1
J11
1
BootLoader
J12
1
5V from PSU
J13
1
ALT_OLED
J14
1
VSPEED_OLED
J15
Show 66 more
QtyPartRefs
1
R_FD
J16
1
R_LS
J17
1
R_CSTR
J18
1
R_WPT
J19
1
R_VORD
J20
1
R_NDB
J21
1
R_ARPT
J22
1
LB_PULL
J23
1
LB_PUSH
J24
1
LB_hPa/inHg
J25
1
L_FD
J26
1
L_LS
J27
1
L_CSTR
J28
1
L_WPT
J29
1
SPD/MACH
J30
1
HDG/TRK
J31
1
MET_ALT
J32
1
LVL_OFF
J33
1
S_PUSH
J34
1
HDG_ENC
J35
1
RB_ENC
J36
1
H_PUSH
J37
1
RB_PULL
J38
1
RB_hPa/inHg
J39
1
L_VORD
J40
1
SPD_ENC
J41
1
ALT_ENC
J42
1
A_PUSH
J43
1
RB_PUSH
J44
1
A_1H_1K
J45
1
VS_ENC
J46
1
L_NDB
J47
1
VS_PUSH
J48
1
RVOR/ADF_1
J49
1
RVOR/ADF_2
J50
1
R_MAP_MODE
J51
1
L_ARPT
J52
1
R_MAP_RANGE
J53
1
L_MAP_MODE
J54
1
L_MAP_RANGE
J55
1
LB_ENC
J56
1
LVOR/ADF_1
J57
1
LVOR/ADF_2
J58
1
S_PULL
J69
1
H_PULL
J70
1
A_PULL
J71
1
VS_PULL
J72
1
USB_B
P1
1
PCA9548APW
I2C_1
1
Power Selector
JP1
1
SW_DIP_x03
SW1
1
12MHz
XT12MHz1
1
16MHz
XT16MHz1
1
PWR
D1
18
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +10
1
10uF
C10
5
22pF
C11, C13, C14, C16, C18
2
100uF
C21, C23
1
220uF
C27
16
4.7K
R1, R2, R3, R4, R5, R6, R21, R22 +8
9
10K
R7, R8, R9, R10, R17, R18, R19, R20 +1
1
220
R11
2
1K
R12, R13
1
1.5K
R14
2
100k
R32, R33
1
620
R34

FCU Mainboard v3 design files

The KiCad project lives in the stefanofinetti/MF_A320_Glareshield repository on GitHub; these links point at the commit this page was built from.

FCU Mainboard v3: common questions

What microcontroller does the FCU Mainboard v3 use?

The FCU Mainboard v3 is built around the ATMega2560, from the AVR/Arduino family.

How big is the FCU Mainboard v3 PCB?

The FCU Mainboard v3 measures 270 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FCU Mainboard v3?

136 components, from 86 distinct parts. The full bill of materials is listed on this page.

Where can I download the FCU Mainboard v3 design files?

From the stefanofinetti/MF_A320_Glareshield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FCU Mainboard v3 design in my own project?

Yes, under the terms of its GPL-3.0 license, which stefanofinetti chose for the repository.

Can I test firmware for the FCU Mainboard v3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MF_A320_Glareshield

Similar boards