Four relays extension board
stephaneamans·app-home_automation·02-module_satellite/02-hardware/four_relays_extension/four_relays_extension.kicad_pcb
About the Four relays extension board
Four relays extension board is an open source PCB design by stephaneamans, published on GitHub. It is a 2-layer board measuring 78.7 × 50.6 mm, with 32 components from 13 distinct parts.
Other key parts include the AT24C16D-SS and MCP23008-SS. By type, the board carries 7 resistors, 5 connectors, 4 transistors, 4 relays, 4 diodes and 2 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).
The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).
The main ECU shall communicate with an high speed link (Ethernet / WiFi) to the gateway. A communication link shall be established with the satellite modules even by wire (RS-485) or wireless (NRF24L01, 2.4 gHz link).
Main components on the Four relays extension board
Four relays extension board bill of materials (BOM)
32 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT24C16D-SS | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MCP23008-SS | SSOP-20_5.3x7.2mm_P0.65mm | U2 |
| 4 | BSS138LT3G | SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | Conn_HE13_1x3_2.54V | PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4 |
| 1 | Conn_HE13_1x6_2.54V | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 2 | drill_hole_2mm_nocu | Drill_hole_2mm_nocu | H1, H2 |
| 2 | drill_hole_5mm | Drill_hole_5mm | H3, H4 |
| 4 | Relay SPDT_Type1 | Relay_SPDT_Type1 | K1, K2, K3, K4 |
| 4 | 1N4148WS | D_SOD-323_HandSoldering | D1, D2, D3, D4 |
| 2 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 4 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
Four relays extension board design files
The KiCad project lives in the stephaneamans/app-home_automation repository on GitHub; these links point at the commit this page was built from.
Four relays extension board: common questions
How big is the Four relays extension board?
The Four relays extension board measures 78.7 × 50.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Four relays extension board?
32 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Four relays extension board design files?
From the stephaneamans/app-home_automation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Four relays extension board design in my own project?
The repository has no license, so all rights stay with stephaneamans. Use it as a reference, and ask the author before reusing the design.
More boards in app-home_automation
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547