Two relays extension

stephaneamans·app-home_automation·02-module_satellite/02-hardware/two_relays_extension/two_relays_extension.kicad_pcb

Two relays extension PCB layout, top view — open source board by stephaneamans

About the Two relays extension PCB

Two relays extension is an open source PCB design by stephaneamans, published on GitHub. It is a 2-layer board measuring 41.3 × 50.7 mm, with 18 components from 11 distinct parts.

Other key parts include the AT24C16D-SS and MCP23008-SS. By type, the board carries 5 resistors, 3 connectors, 2 ICs, 2 transistors, 2 relays and 2 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).

The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).

The main ECU shall communicate with an high speed link (Ethernet / WiFi) to the gateway. A communication link shall be established with the satellite modules even by wire (RS-485) or wireless (NRF24L01, 2.4 gHz link).

Main components on the Two relays extension

AT24C16D-SSMCP23008-SS

Two relays extension bill of materials (BOM)

18 components, 11 distinct parts.

QtyPartRefs
1
AT24C16D-SS
U1
1
MCP23008-SS
U2
2
BSS138LT3G
Q1, Q2
2
Conn_HE13_1x3_2.54V
J1, J2
1
Conn_HE13_1x6_2.54V
J3
2
Relay SPDT_Type1
K1, K2
2
1N4148WS
D1, D2
2
100n
C1, C2
2
1M
R1, R2
2
DNP
R3, R4
1
10k
R5

Two relays extension design files

The KiCad project lives in the stephaneamans/app-home_automation repository on GitHub; these links point at the commit this page was built from.

Two relays extension: common questions

How big is the Two relays extension PCB?

The Two relays extension measures 41.3 × 50.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Two relays extension?

18 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Two relays extension design files?

From the stephaneamans/app-home_automation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Two relays extension design in my own project?

The repository has no license, so all rights stay with stephaneamans. Use it as a reference, and ask the author before reusing the design.

More boards in app-home_automation

Similar boards