Home automation module

stephaneamans·app-home_automation·02-module_satellite/02-hardware/home_automation_module_std/home_automation_module_std.kicad_pcb

Home automation module layout, top view — open source STM32 board by stephaneamans

About the Home automation module

Home automation module is an open source STM32 PCB design by stephaneamans, published on GitHub. It is a 4-layer board measuring 41.3 × 55 mm, with 72 components from 32 distinct parts.

Its main chip is the STM32G030_C8, from the STM32 family. Other key parts include the TPS70933DBV, TPS70950DBV and MAX487CSA_ESA. By type, the board carries 32 resistors, 11 transistors, 11 capacitors, 6 connectors, 5 ICs and 3 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).

The general principle is based on a centralised ECU (Raspbery Pi) with an optional coprpocessor (STM32) used to manage low speed IO. It shall communicate with satellite modules dedicated to specific tasks (like input, output and so on).

The main ECU shall communicate with an high speed link (Ethernet / WiFi) to the gateway. A communication link shall be established with the satellite modules even by wire (RS-485) or wireless (NRF24L01, 2.4 gHz link).

Main components on the Home automation module

TPS70933DBVTPS70950DBVMAX487CSA_ESASTM32G030_C8

Home automation module bill of materials (BOM)

72 components, 32 distinct parts.

QtyPartRefs
1
TPS70933DBV
U1
1
TPS70950DBV
U2
1
~
U3
1
MAX487CSA_ESA
U4
1
STM32G030_C8
U5
1
nRF24L01
M1
5
BSS315PH6327XTSA1
Q1, Q3, Q5, Q7, Q9
5
BC848B
Q2, Q4, Q6, Q8, Q10
1
2SK1829
Q11
1
Crystal_3.2x1.5mm
Y1
2
Conn_HE13_1x2_2.54V
J1, J6
2
Conn_HE13_1x6_2.54V
J2, J3
1
Conn_HE13_1x4_2.54V
J4
1
Conn_HE13_1x3_2.54V
J5
2
test_point_th
TP1, TP2
1
SFH5701_A01
D1
1
LED_G
D2
1
BAT54SW
D3
4
1u
C1, C4, C7, C11
2
2.2u
C2, C5
Show 12 more
QtyPartRefs
1
10u
C3
2
100n
C6, C8
2
TBD
C9, C10
10
10k
R1, R5, R6, R9, R10, R14, R15, R19 +2
5
1k
R2, R7, R12, R17, R22
1
3.3k
R3
5
DNP
R4, R26, R27, R28, R29
4
390k
R8, R13, R18, R23
4
120k
R11, R16, R21, R24
1
330
R30
1
15k
R32
1
4.7k
R33

Home automation module design files

The KiCad project lives in the stephaneamans/app-home_automation repository on GitHub; these links point at the commit this page was built from.

Home automation module: common questions

What microcontroller does the Home automation module use?

The Home automation module is built around the STM32G030_C8, from the STM32 family.

How big is the Home automation module?

The Home automation module measures 41.3 × 55 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the Home automation module?

72 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Home automation module design files?

From the stephaneamans/app-home_automation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Home automation module design in my own project?

The repository has no license, so all rights stay with stephaneamans. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Home automation module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in app-home_automation

Similar boards