Tiny oled.hardware

stephendpmurphy·tiny-oled.hardware·tiny-oled/tiny-oled.kicad_pcb

Tiny oled.hardware PCB layout, top view — open source AVR/Arduino board by stephendpmurphy

About the Tiny oled.hardware PCB

Tiny oled.hardware is an open source AVR/Arduino PCB design by stephendpmurphy, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 62.5 × 28 mm, with 49 components from 15 distinct parts.

Its main chip is the ATtiny87-MU, from the AVR/Arduino family. Other key parts include the FT230XQ. By type, the board carries 21 resistors, 15 capacitors, 5 diodes, 3 connectors, 3 switches and 2 ICs.

It belongs with the displays & leds designs in this gallery.

From the project

A project built around learning new concepts and challenging my current understanding and capabilities in Electrical Hardware design

The project for the firmware can be found in the tiny-oled.firmware repository on my profile. The project will be created and managed using the open source electrical design suite, KiCad.

Main components on the Tiny oled.hardware

ATtiny87-MUFT230XQ

Tiny oled.hardware bill of materials (BOM)

49 components, 15 distinct parts.

QtyPartRefs
1
ATtiny87-MU
U1
1
FT230XQ
U2
1
USB4085-GF-A
J1
1
Micro_SD_Card_Det_Hirose_DM3AT
J2
1
F32Q-1A7H1-11015
J3
3
EVQP7A
SW1, SW2, SW3
5
WS2812B
D1, D2, D3, D4, D5
9
.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +1
4
1uF
C9, C10, C12, C14
2
10uF
C11, C13
10
10k
R1, R2, R3, R4, R5, R6, R7, R8 +2
2
27
R11, R12
7
0
R13, R14, R17, R18, R19, R20, R21
1
470
R15
1
560k
R16

Tiny oled.hardware design files

The KiCad project lives in the stephendpmurphy/tiny-oled.hardware repository on GitHub; these links point at the commit this page was built from.

Tiny oled.hardware: common questions

What microcontroller does the Tiny oled.hardware use?

The Tiny oled.hardware is built around the ATtiny87-MU, from the AVR/Arduino family.

How big is the Tiny oled.hardware PCB?

The Tiny oled.hardware measures 62.5 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tiny oled.hardware?

49 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tiny oled.hardware design files?

From the stephendpmurphy/tiny-oled.hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Tiny oled.hardware design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which stephendpmurphy chose for the repository.

Can I test firmware for the Tiny oled.hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards