Odsci

sthivaios·odsci·hardware/odsci.kicad_pcb

Odsci PCB layout, top view — open source STM32 board by sthivaios

About the Odsci PCB

Odsci is an open source STM32 PCB design by sthivaios, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50 × 70 mm, with 31 components from 18 distinct parts.

Its main chip is the STM32F042K6Tx, from the STM32 family. Other key parts include the TPS7A4701xRGW and USBLC6-2SC6. By type, the board carries 12 capacitors, 8 resistors, 4 connectors, 3 ICs, 3 diodes and 1 switch.

It belongs with the sensors designs in this gallery.

From the project

An STM32-based USB interface for DS18B20 temperature sensors

If you want to get started using ODSCI quickly, and don't care about the project, this is the only section of the README that matters to you.

You can grab a pre-built CLI binary from the releases page for your platform/OS, or build from source. The CLI is written in Go and is located in the /cli directory.

Connect the ODSCI probe to your computer, and find the serial port that it uses (COM port on Windows, or a /dev/tty device on Linux and MacOS).

Odsci, from the project README
From the project README

Main components on the Odsci

Odsci bill of materials (BOM)

31 components, 18 distinct parts.

QtyPartRefs
1
TPS7A4701xRGW
U1
1
STM32F042K6Tx
U2
1
USBLC6-2SC6
U3
1
USB_C_Receptacle
J1
1
Conn_01x03_Pin
J2
1
Conn_01x04_Pin
J3
1
Screw_Terminal_01x03
J4
1
SW_Push
SW1
3
LED
D1, D2, D3
1
1uF
C1
1
10uF
C2
6
100nF
C3, C4, C5, C6, C7, C9
3
4.7uF
C8, C10, C12
1
47uF
C11
2
5.1k
R1, R2
2
10k
R3, R4
1
4.7k
R5
3
330
R6, R7, R8

Odsci design files

The KiCad project lives in the sthivaios/odsci repository on GitHub; these links point at the commit this page was built from.

Odsci: common questions

What microcontroller does the Odsci use?

The Odsci is built around the STM32F042K6Tx, from the STM32 family.

How big is the Odsci PCB?

The Odsci measures 50 × 70 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Odsci?

31 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Odsci design files?

From the sthivaios/odsci repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Odsci design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which sthivaios chose for the repository.

Can I test firmware for the Odsci without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards