LoRa-V3-Mini

Strooom·LoRa-V3-Mini-PCB

LoRa-V3-Mini PCB layout, top view — open source board by Strooom

About the LoRa-V3-Mini PCB

LoRa-V3-Mini is an open source PCB design by Strooom, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 52 × 18 mm, with 20 components from 14 distinct parts.

Other key parts include the 114993121, BR24G1MFVT-5AE2, SHT40-BD1B-R2 and TSL25911FN. By type, the board carries 6 capacitors, 4 ICs, 4 resistors, 2 switches, 1 transistor and 1 connector.

It belongs with the rf & radio, displays & leds and sensors designs in this gallery.

From the project

This is a stripped-down version of https://github.com/Strooom/LoRa-V3-PCB no rechargeable battery - only 14250 type Li batteries 3.0 up to 3.6V no e-paper display no USB for charging non-volatile memory 128KByte io up to 512 KByte no BME68X - only SHT40 and TSL2591 no QWIIC conne

This is a stripped-down version of https://github.com/Strooom/LoRa-V3-PCB no rechargeable battery - only 14250 type Li batteries 3.0 up to 3.6V no e-paper display no USB for charging non-volatile memory 128KByte io up to 512 KByte no BME68X - only SHT40 and TSL2591 no QWIIC connector internal antenna with less gain application button is 1-way, io 3-way

KiCAD design files for the LoRa-V3-Mini PCB.

LoRa-V3-Mini, from the project README
From the project README

Main components on the LoRa-V3-Mini

LoRa-V3-Mini bill of materials (BOM)

20 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
114993121
Seeed_Wio-E5 LE
U1
1
BR24G1MFVT-5AE2
BR24G1MFVT
U2
1
SHT40-BD1B-R2
SHT40
U3
1
TSL25911FN
TSL25911
U4
1
SI2367DS-T1-GE3
NA
Q1
1
NA
UART2 - CLI
CONN2
1
ANT-868-CHP-T
Chip Antenna
ANT1
1
108
Battery Holder
BH1
1
434331045822
Application Button
SW1
1
434133025816
MCU Reset
SW2
4
CGA3E2X7R1E104K080AA
100nF
C1, C2, C3, C5
2
CL21B475KPFNFNE
4.7uF
C10, C11
3
CR0603-FX-4701ELF
4K7
R1, R2, R3
1
AC0603JR-07330KL
330K
R4

LoRa-V3-Mini design files

The KiCad project lives in the Strooom/LoRa-V3-Mini-PCB repository on GitHub; these links point at the commit this page was built from.

LoRa-V3-Mini: common questions

How big is the LoRa-V3-Mini PCB?

The LoRa-V3-Mini measures 52 × 18 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LoRa-V3-Mini?

20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LoRa-V3-Mini design files?

From the Strooom/LoRa-V3-Mini-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LoRa-V3-Mini design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Similar boards