7 open source boards using the TSL25911FN
Real designs built with the TSL25911FN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
NRF dev board
EmielV2002
122.1 × 104.4 mm104 parts4LGPL-3.00ESP32
ESPBoosted
schoolllex
52.8 × 71.8 mm51 parts2LNo license0LoRa-V3-Mini
Strooom
52 × 18 mm20 parts2LCC-BY-NC-4.00LoRa-V3-Sensor
Strooom
10 × 10 mm6 parts2LCC-BY-NC-4.00Wooden Smart Clock — sensor board
tibm30 × 16 mm29 parts4LNo license1Lux Module
jeevan9s
20 × 18 mm8 parts2LNo license2ESP32
EnvSensor
JakobThiessen
52.8 × 26.5 mm19 parts2LMIT0
How designs wire the TSL25911FN
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TSL25911FN connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 88% | — |
| NCpin 4 | Connected to: Not connected 86% | — |
| VDDpin 5 | Connected to: 3.3V 88% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lux Module by jeevan9s, Wooden Smart Clock — sensor board by tibm, NRF dev board by EmielV2002 and EnvSensor by JakobThiessen.
The TSL25911FN in open source designs
The gallery holds 7 open source boards using the TSL25911FN from 7 GitHub repositories; a typical one measures about 52 × 18 mm and carries around 20 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Lux Module by jeevan9s.
Parts used alongside the TSL25911FN
Microcontrollers on boards using the TSL25911FN
What boards using the TSL25911FN are built for
TSL25911FN: common questions
Where can I find a TSL25911FN reference design?
Each of the 7 boards on this page is a real design using the TSL25911FN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TSL25911FN VDD pin?
The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TSL25911FN.
Which microcontrollers do boards using the TSL25911FN use?
Most are built on ESP32 (2) and Nordic nRF (1).
How big is a typical board using the TSL25911FN?
The median is 52 × 18 mm, and 71% are two-layer designs.
What is the most popular open source board using the TSL25911FN?
By GitHub stars, Lux Module by jeevan9s, with 2 stars.
Can I simulate one of these boards using the TSL25911FN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.