AndromedaV3
StudentOrganisationForAerospaceResearch·Andromeda-V3·AndromedaV3/AndromedaV3.kicad_pcb
About the AndromedaV3 PCB
AndromedaV3 is an open source STM32 PCB design by StudentOrganisationForAerospaceResearch, published on GitHub. It is a 2-layer board measuring 61.5 × 59.2 mm, with 45 components from 26 distinct parts.
Its main chip is the STM32F405R, from the STM32 family. Other key parts include the AP2210-3.3 and TPS562200. By type, the board carries 20 capacitors, 9 resistors, 7 connectors, 3 ICs, 3 diodes and 1 transistor.
It belongs with the sensors designs in this gallery.
From the project
Flight Board with Daughter (Sensor) Board
Main components on the AndromedaV3
AndromedaV3 bill of materials (BOM)
45 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2210-3.3 | SOT-23 | U1 |
| 1 | TPS562200 | SOT-23-6 | U2 |
| 1 | STM32F405R | LQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | Q_NMOS_GSD | SOT-23 | Q1 |
| 1 | Crystal_8MHz_18pf | Crystal_SMD_HC49-SD | Y1 |
| 1 | Conn_01x02 | TerminalBlock_5mm_2POS_ED2600 | J1 |
| 1 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 3 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3, J4, J5 |
| 1 | Conn_01x04 | Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J6 |
| 1 | Conn_02x12_Top_Bottom | Pin_Header_Straight_2x12_Pitch2.54mm | J7 |
| 1 | Green | LED_0805 | D1 |
| 2 | LED | LED_0805 | D2, D3 |
| 1 | 4.7uH | L_1008 | L1 |
| 3 | 10uF | C_0603 | C1, C3, C12 |
| 2 | 1uF | C_0603 | C2, C16 |
| 6 | 0.1uF | C_0603 | C4, C6, C14, C15, C17, C19 |
| 3 | 2.2uF | C_0603 | C5, C9, C10 |
| 2 | 22uF | C_0603 | C7, C8 |
| 2 | 24pF | C_0603 | C11, C13 |
| 1 | 10nF | C_0603 | C18 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150u | CP_Tantalum_Case-D_EIA-7343-31_Reflow | C20 |
| 3 | 10k | R_0603 | R1, R2, R7 |
| 1 | 10 | R_0603 | R3 |
| 1 | 54.9k | R_0603 | R4 |
| 3 | 330 | R_0603 | R5, R8, R9 |
| 1 | 30K | R_0603 | R6 |
AndromedaV3 design files
The KiCad project lives in the StudentOrganisationForAerospaceResearch/Andromeda-V3 repository on GitHub; these links point at the commit this page was built from.
AndromedaV3: common questions
What microcontroller does the AndromedaV3 use?
The AndromedaV3 is built around the STM32F405R, from the STM32 family.
How big is the AndromedaV3 PCB?
The AndromedaV3 measures 61.5 × 59.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AndromedaV3?
45 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the AndromedaV3 design files?
From the StudentOrganisationForAerospaceResearch/Andromeda-V3 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AndromedaV3 design in my own project?
The repository has no license, so all rights stay with StudentOrganisationForAerospaceResearch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AndromedaV3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Andromeda-V3
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k