18 open source boards using the TPS562200

Real designs built with the TPS562200, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TPS562200

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TPS562200 connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a series capacitor on 15 of 15 designs, most often 100 nF.
  • The SW pin has a inductor on 15 of 15 designs, most often 4.7 µH (then 3.3 µH).
  • The VFB pin has a resistor to GND on 15 of 15 designs, most often 10 kΩ (then 30.1 kΩ).
  • The VFB pin has a pull-up to 5V on 15 of 15 designs, most often 54.9 kΩ (then 33.2 kΩ).
GNDpin 1Connected to: GND 100%
SWpin 2Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (15)
  • Inductor on 100% · 4.7 µH (9), 3.3 µH (3), 6.8 µH (1)
VINpin 3Connected to: BATT 87%
  • Decoupling capacitor on 80% · 10 µF (12), 100 nF (6), 22 µF (1)
VFBpin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (12), 30.1 kΩ (2)
  • Pull-up to 5V on 100% · 54.9 kΩ (5), 33.2 kΩ (4), 100 kΩ (2)
ENpin 5Connected to: Signal 67% · BATT 27%
  • Pull-up to 12V on 53% · 10 kΩ (6), 100 kΩ (2)
  • Capacitor to GND on 40% · 10 µF (4), 22 µF (1), 1 µF (1)
VBSTpin 6Connected to: Signal 100%
  • Series capacitor on 93% · 100 nF (14)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Camera by waterloo-rocketry, Hardware v2 by rmingon, NixieNTPClock by bastian-bou and Usbc synth psu by mattvenn.

The TPS562200 in open source designs

The gallery holds 18 open source boards using the TPS562200 from 16 GitHub repositories; a typical one measures about 95 × 78 mm and carries around 73 components.

50% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Camera by waterloo-rocketry.

Parts used alongside the TPS562200

Microcontrollers on boards using the TPS562200

TPS562200: common questions

Where can I find a TPS562200 reference design?

Each of the 18 boards on this page is a real design using the TPS562200. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS562200 SW pin connected?

The SW pin has a series capacitor on 15 of 15 designs, most often 100 nF. Counted from the KiCad layouts of 15 open source designs using the TPS562200.

What resistor goes on the TPS562200 VFB pin?

The VFB pin has a resistor to GND on 15 of 15 designs, most often 10 kΩ (then 30.1 kΩ). Counted from the KiCad layouts of 15 open source designs using the TPS562200.

How is the TPS562200 VBST pin connected?

The VBST pin has a series capacitor on 14 of 15 designs, most often 100 nF. Counted from the KiCad layouts of 15 open source designs using the TPS562200.

What parts are used alongside the TPS562200?

The USBLC6-2SC6, AP2210-3.3 and STM32F405R appear in the most repositories here.

Which microcontrollers do boards using the TPS562200 use?

Most are built on STM32 (8), AVR/Arduino (4), ESP32 (2) and RISC-V (1).

How big is a typical board using the TPS562200?

The median is 95 × 78 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPS562200?

By GitHub stars, Camera by waterloo-rocketry, with 15 stars.

Can I simulate one of these boards using the TPS562200 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part