5 open source boards using the STM32F405R
Real designs built with the STM32F405R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Fannyadams
svofski
154.9 × 102.9 mm300 parts2LNo license2STM32
Andromeda-V2.2
StudentOrganisationForAerospaceResearch
86.1 × 66.3 mm82 parts2LNo license1STM32
AndromedaV3
StudentOrganisationForAerospaceResearch
61.5 × 59.2 mm45 parts2LNo license1STM32
SensorBoard 2018
StudentOrganisationForAerospaceResearch
56.9 × 68.3 mm34 parts2LNo license1STM32
Avionics-Andromeda
StudentOrganisationForAerospaceResearch
50 × 70 mm86 parts4LNo license0
How designs wire the STM32F405R
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F405R connects to, and the resistors, capacitors and other passives placed on it.
- Pin 5 has a crystal on 5 of 5 designs, most often 25 MHz (then 8 MHz).
- Pin 5 has a capacitor to GND on 5 of 5 designs, most often 24 pF.
- Pin 6 has a crystal on 5 of 5 designs, most often 25 MHz (then 8 MHz).
- Pin 6 has a capacitor to GND on 5 of 5 designs, most often 24 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| Pin 2 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 3 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 4 | Connected to: Signal 60% · not connected 40% |
|
| Pin 5 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 9 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 10 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 12 | Connected to: GND 100% | — |
| Pin 13 | Connected to: 3.3V 100% |
|
| Pin 18 | Connected to: GND 100% | — |
| Pin 19 | Connected to: 3.3V 100% |
|
| Pin 24 | Connected to: A connector 40% · not connected 40% |
|
| Pin 25 | Connected to: Signal 60% · not connected 40% |
|
| Pin 27 | Connected to: Signal 100% |
|
| Pin 28 | Connected to: Signal 80% · not connected 20% |
|
| Pin 30 | Connected to: Signal 80% · not connected 20% |
|
| Pin 31 | Connected to: Signal 100% |
|
| Pin 32 | Connected to: 3.3V 100% |
|
| Pin 37 | Connected to: A connector 40% |
|
| Pin 39 | Connected to: A connector 60% · not connected 20% |
|
| Pin 40 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 41 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 42 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 47 | Connected to: Signal 100% |
|
| Pin 48 | Connected to: 3.3V 100% |
|
| Pin 54 | Connected to: A connector 80% · not connected 20% |
|
| Pin 56 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 57 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 60 | Connected to: GND 80% · a signal 20% | — |
| Pin 61 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 62 | Connected to: Not connected 80% · a signal 20% | — |
| Pin 63 | Connected to: GND 100% | — |
| Pin 64 | Connected to: 3.3V 100% |
|
29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fannyadams by svofski, Andromeda-V2.2 by StudentOrganisationForAerospaceResearch, AndromedaV3 by StudentOrganisationForAerospaceResearch and SensorBoard 2018 by StudentOrganisationForAerospaceResearch.
The STM32F405R in open source designs
The gallery holds 5 open source boards using the STM32F405R from 5 GitHub repositories; a typical one measures about 61.5 × 68.3 mm and carries around 82 components.
80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Fannyadams by svofski.
Parts used alongside the STM32F405R
Microcontrollers on boards using the STM32F405R
STM32F405R: common questions
Where can I find a STM32F405R reference design?
Each of the 5 boards on this page is a real design using the STM32F405R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F405R pin 5 connected?
Pin 5 has a crystal on 5 of 5 designs, most often 25 MHz (then 8 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32F405R.
How is the STM32F405R pin 6 connected?
Pin 6 has a crystal on 5 of 5 designs, most often 25 MHz (then 8 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32F405R.
How is the STM32F405R pin 31 connected?
Pin 31 has a capacitor to GND on 5 of 5 designs, most often 2.2 µF. Counted from the KiCad layouts of 5 open source designs using the STM32F405R.
What parts are used alongside the STM32F405R?
The AP2210-3.3, FT230XS, INA326, LSM9DS1 and MS5607 appear in the most repositories here.
Which microcontrollers do boards using the STM32F405R use?
Most are built on STM32 (5).
How big is a typical board using the STM32F405R?
The median is 61.5 × 68.3 mm, and 80% are two-layer designs.
What is the most popular open source board using the STM32F405R?
By GitHub stars, Fannyadams by svofski, with 2 stars.
Can I simulate one of these boards using the STM32F405R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.