HardLabs

SensorBoard 2018

StudentOrganisationForAerospaceResearch·SensorBoard_2018

SensorBoard 2018 PCB layout, top view — open source STM32 board by StudentOrganisationForAerospaceResearch

About the SensorBoard 2018 PCB

SensorBoard 2018 is an open source STM32 PCB design by StudentOrganisationForAerospaceResearch, published on GitHub. It is a 2-layer board measuring 56.9 × 68.3 mm, with 34 components from 24 distinct parts.

Its main chip is the STM32F405R, from the STM32 family. Other key parts include the MS5607-02BA, BMF055 and INA326. By type, the board carries 20 capacitors, 7 resistors, 4 ICs, 2 connectors and 1 crystal.

Main components on the SensorBoard 2018

MS5607-02BABMF055STM32F405RINA326

SensorBoard 2018 bill of materials (BOM)

34 components, 24 distinct parts.

QtyPartRefs
1
MS5607-02BA
U1
1
BMF055
U2
1
STM32F405R
U3
1
INA326
U4
1
Crystal_8MHz_18pf
Y1
1
Tank Pressure
J1
1
Micro_SD_Card
J2
3
100n
C1, C2, C5
1
6.8n
C3
1
120n
C4
1
10u
C6
2
2.2uF
C7, C8
2
24pF
C9, C11
1
10uF
C10
5
0.1uF
C12, C13, C15, C17, C19
2
1uF
C14, C20
1
10nF
C16
1
0.5nF
C18
2
10k
R1, R2
1
30K
R3
Show 4 more
QtyPartRefs
1
10K
R4
1
13K
R5
1
200K
R6
1
100
R7

SensorBoard 2018 design files

The KiCad project lives in the StudentOrganisationForAerospaceResearch/SensorBoard_2018 repository on GitHub; these links point at the commit this page was built from.

SensorBoard 2018: common questions

What microcontroller does the SensorBoard 2018 use?

The SensorBoard 2018 is built around the STM32F405R, from the STM32 family.

How big is the SensorBoard 2018 PCB?

The SensorBoard 2018 measures 56.9 × 68.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SensorBoard 2018?

34 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the SensorBoard 2018 design files?

From the StudentOrganisationForAerospaceResearch/SensorBoard_2018 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the SensorBoard 2018 design in my own project?

The repository has no license, so all rights stay with StudentOrganisationForAerospaceResearch. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SensorBoard 2018 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards