25 open source boards using the MS5607-02BA
Real designs built with the MS5607-02BA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Flight computer
linguini1
83.7 × 62.9 mm82 parts4LNo license17Microchip SAM
Project-Mach-1
ImperialSpaceSociety
30.5 × 82.6 mm82 parts4LNo license12Avionics payload
usfsoar
78 × 78 mm31 parts2LNo license9Microchip SAM
Mini rocket flight controller
AmitBarman99
73.7 × 49.3 mm108 parts4LNo license2STM32
Flight-Computer
Pioneer-Rocketry
30 × 60 mm100 parts6LNo license2RP2040/RP2350
Rudolph Tracker
UMDBPP
45.6 × 25 mm55 parts4LNo license1STM32
Main-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
SensorBoard 2018
StudentOrganisationForAerospaceResearch
56.9 × 68.3 mm34 parts2LNo license1RP2040/RP2350
Main board
UMDBPP
121 × 66.5 mm179 parts4LNo license0STM32
OshTelemega
Kev1n8088
30 × 80 mm151 parts4LNo license0ESP32
Flight Computer V1
colin-skinner
77.5 × 66 mm92 parts2LNo license0STM32
STM32-DevBoard
Basile-hltd
134.6 × 42 mm90 parts4LNo license0STM32
DumbFCC
Curtis-05
70 × 50 mm71 parts4LMIT0STM32
Picoballoon2020
kajusK
22.3 × 49.9 mm62 parts2LGPL-3.00STM32
Picoballoon
kajusK
41 × 56.3 mm47 parts2LNo license0MVPGPSTracker
Kev1n8088
20 × 38 mm13 parts2LNo license0AtlasHardware
reusable-rocketry-at-purdue
80 × 80 mm10 parts2LCustom license0STM32
Pyro-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
Obc v1
harmalkar
61 × 45.1 mm29 parts4LNo license1ESP32
(OLD) Flight Computer V1
colin-skinner
57.4 × 68.3 mm92 parts2LNo license0STM32
Radio-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1ESP32
Test Rocket Board
colin-skinner
68 × 66 mm79 parts2LNo license0STM32
Recovery-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
Ride along module
Rowan-Rocketry
50.3 × 37.9 mm44 parts2LNo license1IMU
Rowan-Rocketry
22.9 × 22.9 mm7 parts2LNo license1
How designs wire the MS5607-02BA
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the MS5607-02BA connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 10 µF).
- The SDI/SDA pin has a pull-up to 3.3V on 10 of 17 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCLK pin has a pull-up to 3.3V on 10 of 17 designs, most often 10 kΩ (then 4.7 kΩ).
- The PS pin is tied to 3.3V on 11 of 17 designs (GND on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 100% |
|
| PSpin 2 | Connected to: 3.3V 65% · GND 35% | — |
| GNDpin 3 | Connected to: GND 88% | — |
| SDI/SDApin 7 | Connected to: The microcontroller 76%, a connector 24% |
|
| SCLKpin 8 | Connected to: The microcontroller 76%, a connector 24% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flight computer by linguini1, Project-Mach-1 by ImperialSpaceSociety, Avionics payload by usfsoar and Mini rocket flight controller by AmitBarman99.
The MS5607-02BA in open source designs
The gallery holds 25 open source boards using the MS5607-02BA from 18 GitHub repositories; a typical one measures about 68 × 50 mm and carries around 55 components.
56% use four copper layers or more, and 8% carry an open source license.
The most starred is Flight computer by linguini1.
Parts used alongside the MS5607-02BA
Microcontrollers on boards using the MS5607-02BA
What boards using the MS5607-02BA are built for
MS5607-02BA: common questions
Where can I find a MS5607-02BA reference design?
Each of the 25 boards on this page is a real design using the MS5607-02BA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS5607-02BA VDD pin?
The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the MS5607-02BA.
What pull-up resistor is used on the MS5607-02BA SDI/SDA pin?
The SDI/SDA pin has a pull-up to 3.3V on 10 of 17 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 17 open source designs using the MS5607-02BA.
What pull-up resistor is used on the MS5607-02BA SCLK pin?
The SCLK pin has a pull-up to 3.3V on 10 of 17 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 17 open source designs using the MS5607-02BA.
What parts are used alongside the MS5607-02BA?
The MAX-M10S, RP2040, BMI088, DRF1262TL and ICM-20948 appear in the most repositories here.
Which microcontrollers do boards using the MS5607-02BA use?
Most are built on STM32 (13), ESP32 (3), RP2040/RP2350 (3) and Microchip SAM (2).
How big is a typical board using the MS5607-02BA?
The median is 68 × 50 mm, and 44% are two-layer designs.
What is the most popular open source board using the MS5607-02BA?
By GitHub stars, Flight computer by linguini1, with 17 stars.
Can I simulate one of these boards using the MS5607-02BA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.