Arduino expansion-Board
sugantharjunan·Arduino-expansion-Board
About the Arduino expansion-Board
Arduino expansion-Board is an open source PCB design by sugantharjunan, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 23 components from 12 distinct parts.
By type, the board carries 12 connectors, 3 switches, 3 diodes, 3 resistors and 1 speaker.
It belongs with the robotics & motion designs in this gallery.
From the project
An Arduino UNO Compatible Sensor Shield designed using KiCad 10. This PCB expands the Arduino UNO by providing dedicated Digital, Analog, Power, and Ground headers while integrating useful onboard components such as a buzzer, potentiometer, LEDs, and push buttons for rapid protot
An Arduino UNO Compatible Sensor Shield designed using KiCad 10. This PCB expands the Arduino UNO by providing dedicated Digital, Analog, Power, and Ground headers while integrating useful onboard components such as a buzzer, potentiometer, LEDs, and push buttons for rapid prototyping and embedded system development.
- Arduino UNO Compatible - Digital I/O Expansion Headers - Analog Input Headers - Dedicated 5V & GND Headers - On-board Buzzer - 10K Potentiometer - Power Indicator LED - Two User LEDs - Two Push Buttons - Easy Sensor Connections - Compact 2-Layer PCB - Designed in KiCad 10
Arduino expansion-Board bill of materials (BOM)
23 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J1, J7 |
| 4 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J2, J8, J11, J12 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J5 |
| 3 | Conn_01x10_Socket | PinSocket_1x10_P2.54mm_Vertical | J6, J9, J10 |
| 1 | CMI-1210-5-95T | XDCR_CMI-1210-5-95T | LS1 |
| 2 | Switch | Switch | S1, S2 |
| 1 | SW_Push | SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | resistor_potentiometer_1 | TRIM_3296W-OT1-103 | VR1 |
| 3 | LED | LED_0805_2012Metric | D1, D2, D3 |
| 3 | 220R | R_0805_2012Metric | R1, R2, R3 |
Arduino expansion-Board design files
The KiCad project lives in the sugantharjunan/Arduino-expansion-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB.kicad_pcb
- SchematicPCB.kicad_sch
- BOMBOM.csv
Arduino expansion-Board: common questions
How big is the Arduino expansion-Board?
The Arduino expansion-Board measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino expansion-Board?
23 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino expansion-Board design files?
From the sugantharjunan/Arduino-expansion-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino expansion-Board design in my own project?
The repository has no license, so all rights stay with sugantharjunan. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979