HardLabs

MyTrackr

SukkoPera·MyTrackr·pcb/KiCad/MyTrackr.kicad_pcb

MyTrackr PCB layout, top view — open source AVR/Arduino board by SukkoPera
Simulate this board

About the MyTrackr PCB

MyTrackr is an open source AVR/Arduino PCB design by SukkoPera, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 39 components from 30 distinct parts.

Its main chip is the ATMEGA48_88_168_328P-32SMD, from the AVR/Arduino family. Other key parts include the GPS-NEO-6M and 24AA32. By type, the board carries 10 resistors, 9 connectors, 5 switches, 5 capacitors, 3 ICs and 3 diodes.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Arduino-Based GPS tracker

Main components on the MyTrackr

ATMEGA48_88_168_328P-32SMDGPS-NEO-6M24AA32

MyTrackr bill of materials (BOM)

39 components, 30 distinct parts.

QtyPartRefs
1
ATMEGA48_88_168_328P-32SMD
U1
1
GPS-NEO-6M
U2
1
24AA32
U3
1
Q_PMOS_GSD
Q1
1
GPS_ANTENNA
CN1
1
MICRO_SD
CON1
1
10A45B_Module
J1
1
CONN_ICSP
J2
1
CONN_01X05
J3
1
CONN_BAT
J4
1
CONN_OLED
P1
2
CONN_01X01
P2, P3
1
GPS_BKP
BT2
1
NO
JP1
1
BTN_RESET
SW1
1
BTN_SEL
SW2
1
BTN_NEXT
SW3
1
BTN_PREV
SW4
1
BTN_BACK
SW5
1
LED
D1
Show 10 more
QtyPartRefs
2
D_Schottky
D2, D3
1
22u
L1
5
100n
C1, C2, C3, C4, C5
1
10k
R1
1
680
R2
1
22
R3
1
1M
R4
2
330k
R5, R9
3
1k
R6, R7, R8
1
100
R10

MyTrackr design files

The KiCad project lives in the SukkoPera/MyTrackr repository on GitHub; these links point at the commit this page was built from.

MyTrackr: common questions

What microcontroller does the MyTrackr use?

The MyTrackr is built around the ATMEGA48_88_168_328P-32SMD, from the AVR/Arduino family.

How big is the MyTrackr PCB?

The MyTrackr measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MyTrackr?

39 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the MyTrackr design files?

From the SukkoPera/MyTrackr repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MyTrackr design in my own project?

The repository has no license, so all rights stay with SukkoPera. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MyTrackr without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards