Openairqmonitor
Summanuss·openairqmonitor·design/AMUN.kicad_pcb
About the Openairqmonitor PCB
Openairqmonitor is an open source STM32 PCB design by Summanuss, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 60 × 40 mm, with 37 components from 23 distinct parts.
Its main chip is the STM32L431CCT6TR, from the STM32 family. Other key parts include the SHT40-AD1B-R2, SGP40-D-R4, AZ1117CH-3.3TRG1 and ER-TFT018-3. By type, the board carries 14 capacitors, 11 resistors, 5 ICs, 3 connectors, 1 transistor and 1 switch.
It belongs with the sensors and displays & leds designs in this gallery.
From the project
Open source hardware to monitor temperature, humidity and VOC in an indoor environment

Main components on the Openairqmonitor
Openairqmonitor bill of materials (BOM)
37 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SHT40-AD1B-R2 | SHT40AD1BR2 | IC2 |
| 1 | SGP40-D-R4 | SON80P244X244X95-7N | IC3 |
| 1 | AZ1117CH-3.3TRG1 | SOT230P700X180-4N | IC4 |
| 1 | STM32L431CCT6TR | QFP50P900X900X160-48N | IC5 |
| 1 | ER-TFT018-3 | ER-TFT018-3 | U2 |
| 1 | SSM3K16FV,L3F | VESM_SOT-723_ | Q2 |
| 1 | UJ20-C-H-G-MSMT-4B-P16-TR | UJ20CHGMSMT4BP16TR | J1 |
| 1 | SFV12R-1STBE1HLF | SFV12R1STBE1HLF | J6 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | EL2 52 35J LFS EL2_52_35J_LFS | EL25235JLFS | S1 |
| 1 | SMAJ6.5CA/TR7 SMAJ6.5CA_TR7 | DIOM5127X250N | D2 |
| 1 | BLM18PG330SH1D | BLM18SP221SN1B | FB2 |
| 8 | CC0603ZRY5V7BB104 100nF | CAPC1608X90N | C1, C2, C3, C4, C5, C17, C18, C19 |
| 2 | CL10B105KP8NFNC 1uF | CAPC1608X90N | C11, C12 |
| 2 | CL10A225KP8NNNC 2.2uF | CAPC1608X90N | C13, C16 |
| 1 | GRM188R61A106ME69J 10uF | GRM18x | C14 |
| 1 | GRM187R61A226ME15D 22uF | GRM18x | C15 |
| 1 | RC0603FR-134R7L | RESC1608X55N | R1 |
| 1 | CRCW06034K70FKEC 4.7K | RESC1608X50N | R2 |
| 5 | RT0603DRD0710KL 10K | RESC1608X55N | R5, R7, R9, R11, R14 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0603FR-7W10RL 10 | RESC1608X55N | R6 |
| 1 | RT0603FRE07100RL 100 | RESC1608X60N | R10 |
| 2 | RC0603FR-135K1L 5.1K | RESC1608X55N | R12, R13 |
Openairqmonitor design files
The KiCad project lives in the Summanuss/openairqmonitor repository on GitHub; these links point at the commit this page was built from.
- Layoutdesign/AMUN.kicad_pcb
- Schematicdesign/AMUN.kicad_sch
- BOMexported/BOM_2.0.csv
Openairqmonitor: common questions
What microcontroller does the Openairqmonitor use?
The Openairqmonitor is built around the STM32L431CCT6TR, from the STM32 family.
How big is the Openairqmonitor PCB?
The Openairqmonitor measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Openairqmonitor?
37 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Openairqmonitor design files?
From the Summanuss/openairqmonitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Openairqmonitor design in my own project?
Yes, under the terms of its Apache-2.0 license, which Summanuss chose for the repository.
Can I test firmware for the Openairqmonitor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k