27 open source boards using the SHT40-AD1B-R2
Real designs built with the SHT40-AD1B-R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Storm tracker hardware
solderable
36.5 × 69 mm79 parts4LNo license56ESP32
AnthC
Anthilla
85 × 56 mm203 parts4LNo license40ESP32
Phone board
JamesTwallin
60 × 33 mm62 parts4LMIT6RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1ESP32
Cryobelt
michael201110
90 × 50 mm92 parts4LNo license1STM32
Openairqmonitor
Summanuss
60 × 40 mm37 parts2LApache-2.01ESP32
Hard-EnvSens
IgorFJensen
60 × 60 mm102 parts2LNo license0Sensor-HAT
Eniemooo
65 × 56 mm94 parts4LCC-BY-SA-4.00ESP32
EdgeLink S3 Cellular
CDonohoe-Designs
56 × 52 mm93 parts4LNo license0STM32
Mixed signal Board Rev A
Akhilesh-design-02
47.1 × 45.4 mm88 parts4LNo license0ESP32
Serre
RubisCatty
57.7 × 41 mm58 parts4LNo license0ESP32
Weatherframe
amselgesang
64 × 46 mm46 parts2LMIT0ESP32
Pot pulse
rwrife
70 × 50 mm41 parts4LMIT0Esp32-solar attic fan controller
alex1klimovich
63.5 × 41.5 mm39 parts2LNo license0ESP32
Bench breathe
rwrife
65 × 75 mm36 parts2LMIT0Weather station-Sensor board
Matyas604
75.2 × 36.5 mm28 parts2LGPL-3.00ESP32
Open-Source-Temperature-Sensor-ESP32-C6
IN4148
30 × 28 mm22 parts2LNo license0Airmon
lordkev
42 × 55 mm18 parts2LNo license0- schematic only · 29 partsESP32
Proto harness
Okohedeki
29 partsMIT0 STM32
CpuAddOn
logisim-evolution
60.6 × 100 mm138 parts6LMIT18ESP32
Phone board mems
JamesTwallin
55 × 31 mm58 parts4LMIT6Homecadia SHT40 satellite
vavallee
14 × 16 mm3 parts2LMIT1STM32
Mixed signal Board Rev B
Akhilesh-design-02
47.1 × 45.4 mm88 parts4LNo license0ESP32
Weatherframe placed
amselgesang
64 × 46 mm46 parts2LMIT0STM32
Mixed signal Board Rev C
Akhilesh-design-02
47.1 × 45.4 mm88 parts4LNo license0STM32
Mixed signal Board Rev D
Akhilesh-design-02
47.1 × 45.4 mm88 parts4LNo license0STM32
Mixed signal Board Rev E
Akhilesh-design-02
47.1 × 45.4 mm88 parts4LNo license0
How designs wire the SHT40-AD1B-R2
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the SHT40-AD1B-R2 connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 17 of 20 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 17 of 20 designs, most often 10 kΩ (then 4.7 kΩ).
- The VDD pin has a decoupling capacitor on 17 of 20 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 65% |
|
| SCLpin 2 | Connected to: The microcontroller 65%, a connector 20% |
|
| VDDpin 3 | Connected to: 3.3V 90% |
|
| VSSpin 4 | Connected to: GND 95% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Storm tracker hardware by solderable, AnthC by Anthilla, CpuAddOn by logisim-evolution and Phone board by JamesTwallin.
The SHT40-AD1B-R2 in open source designs
The gallery holds 27 open source boards using the SHT40-AD1B-R2 from 21 GitHub repositories; a typical one measures about 60 × 45.7 mm and carries around 62 components.
62% use four copper layers or more, and 44% carry an open source license.
The most starred is Storm tracker hardware by solderable.
Parts used alongside the SHT40-AD1B-R2
Microcontrollers on boards using the SHT40-AD1B-R2
What boards using the SHT40-AD1B-R2 are built for
SHT40-AD1B-R2: common questions
Where can I find a SHT40-AD1B-R2 reference design?
Each of the 27 boards on this page is a real design using the SHT40-AD1B-R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SHT40-AD1B-R2 SDA pin?
The SDA pin has a pull-up to 3.3V on 17 of 20 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 20 open source designs using the SHT40-AD1B-R2.
What pull-up resistor is used on the SHT40-AD1B-R2 SCL pin?
The SCL pin has a pull-up to 3.3V on 17 of 20 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 20 open source designs using the SHT40-AD1B-R2.
What decoupling capacitors do designs use on the SHT40-AD1B-R2 VDD pin?
The VDD pin has a decoupling capacitor on 17 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the SHT40-AD1B-R2.
What parts are used alongside the SHT40-AD1B-R2?
The USBLC6-2SC6, ESP32-S3-MINI-1-N8, SGP40-D-R4, SGP41-D-R4 and ADS1115IDGSR appear in the most repositories here.
Which microcontrollers do boards using the SHT40-AD1B-R2 use?
Most are built on ESP32 (14), STM32 (7) and RP2040/RP2350 (1).
How big is a typical board using the SHT40-AD1B-R2?
The median is 60 × 45.7 mm, and 38% are two-layer designs.
What is the most popular open source board using the SHT40-AD1B-R2?
By GitHub stars, Storm tracker hardware by solderable, with 56 stars.
Can I simulate one of these boards using the SHT40-AD1B-R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.