HardLabs

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering

SuperSmashBro08·Madd-Labs-Childrens-4WD-Ride-On-Drive-Module-with-Power-Steering·hardware/PCB Files/Kids Ride On PCB Files/Kicad files/RideOnV2Schematic.kicad_pcb

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering layout, top view — open source board by SuperSmashBro08

About the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering is an open source PCB design by SuperSmashBro08, published on GitHub under the MIT license. It is a 2-layer board measuring 115 × 80 mm, with 64 components from 22 distinct parts.

Other key parts include the SN74AHCT244DWR, CD74HC4050PWR and D24V50F5. By type, the board carries 31 resistors, 15 connectors, 7 diodes, 7 capacitors, 3 ICs and 1 fuse.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Kids 4WD ride-on vehicle control system with ESP32-S3 WiFi OTA updates and Teensy 4.1 motor control

An open-source framework for building smart, connected kids' ride-on vehicles with OTA (Over-The-Air) firmware updates, web-based control, and modular peripheral support.

This project provides a complete hardware and software framework for upgrading kids' electric ride-on toys with:

- Dual-MCU Architecture: ESP32-S3 for WiFi/Web + Teensy 4.1 for real-time control - OTA Firmware Updates: Update both MCUs wirelessly via web browser - Web Dashboard: Monitor and control the vehicle from any device - Modular Design: Easy to add motors, LEDs, sensors, and more - Custom PCB: Purpose-built circuit…

Main components on the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering

SN74AHCT244DWRCD74HC4050PWRD24V50F5

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering bill of materials (BOM)

64 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SN74AHCT244DWR
SN74AHCT244
U1
1
CD74HC4050PWR
CD74HC4050
U2
1
DNP
D24V50F5
U6
3
HX PZ2.54-2x4P ZZ
Conn_02x04_Odd_Even
J1, J2, J10
2
XT60-M.
J3, J15
2
ZX-PM2.54-1-22PY
Conn_01x22
J4, J8
1
B4P-VH(LF)(SN)
Conn_01x04
J5
2
X6511FV-24-C85D32
Conn_01x24
J6, J9
1
B5P-VH(LF)(SN)
Conn_01x05
J7
4
B3P-VH(LF)(SN)
Conn_01x03
J11, J12, J13, J16
1
3557-2
Fuse
F1_30AMP1
1
SMAJ33A
D1
6
BZT52C3V6-6AF
3.4V
D2, D3, D4, D5, D6, D7
2
CC0805KRX7R9BB104
100nF
C7, C12
2
CL21B105KBFNNNE
1uF
C8, C13
2
CL21A106KAYNNNE
10uF
C9, C14
1
HV1V227M0810PZ
220uF/35V
C17
12
RC0603FR-0733RL
33R
R1, R2, R3, R4, R15, R16, R17, R18 +4
6
RC0603FR-071K8L
1.8k
R6, R23, R25, R27, R29, R31
6
RC0603FR-073K3L
3.3k
R7, R8, R24, R26, R28, R30
Show 2 more
QtyPartRefs
6
RC0603FR-0710KL
10k
R9, R10, R11, R12, R13, R14
1
RC0805FR-070RL
0R
R32

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering design files

The KiCad project lives in the SuperSmashBro08/Madd-Labs-Childrens-4WD-Ride-On-Drive-Module-with-Power-Steering repository on GitHub; these links point at the commit this page was built from.

Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering: common questions

How big is the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering?

The Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering measures 115 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering?

64 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering design files?

From the SuperSmashBro08/Madd-Labs-Childrens-4WD-Ride-On-Drive-Module-with-Power-Steering repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Madd-Labs-Childrens-4WD-Ride-On-Drive-Module with-Power-Steering design in my own project?

Yes, under the terms of its MIT license, which SuperSmashBro08 chose for the repository.

Similar boards