P300 HiVolt
About the P300 HiVolt PCB
P300 HiVolt is an open source PCB design by svenjust, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68 × 52.1 mm, with 11 components from 10 distinct parts.
By type, the board carries 6 connectors, 2 transformers and 1 fuse.
It belongs with the displays & leds designs in this gallery.
From the project
Arduino Projekt für ein Lüftungsgerät zur kontrollierten Wohnraum Lüftung (KWL)
Änderungen von HW-0.25 zu HW-0.26 - P300ArduinoIF - Korrektur externer Displayanschluss zum Arduino
Änderungen von HW-0.23 zu HW-0.26 - P300DisplayIF - Korrektur Displayanschluss zum Display
Änderungen von HW-0.23 zu HW-0.25 - P300ArduinoIF - Ergänzung von externen Pullup-Widerstand und Glättungskondensator am Tachosignal
Neu HW-0.25 - P300DiffPress - Entwurf einer Platine für den Aufbau von Differenzdrucksensoren
P300 HiVolt bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02 | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J1 |
| 1 | Conn_01x08 | Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J2 |
| 2 | Stiftleiste 6P | TerminalBlock_bornier-6_P5.08mm | J3, J4 |
| 1 | 12V | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
| 1 | 5V | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J6 |
| 1 | 250V T 4A | Fuseholder_TR5_Littlefuse_No560_No460 | F1 |
| 1 | VAL** | CONV_IRM-05-5 | Meanwell IRM-05-5 |
| 1 | JNR-10D431K | RV_Disc_D12mm_W7.5mm_P7.5mm | RV1 |
| 1 | HLK-PM12 | HLK-PM12 | T1 |
| 1 | HLK-PM05 | HLK-PM12 | T2 |
P300 HiVolt design files
The KiCad project lives in the svenjust/room-ventilation-system repository on GitHub; these links point at the commit this page was built from.
P300 HiVolt: common questions
How big is the P300 HiVolt PCB?
The P300 HiVolt measures 68 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the P300 HiVolt?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the P300 HiVolt design files?
From the svenjust/room-ventilation-system repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the P300 HiVolt design in my own project?
Yes, under the terms of its GPL-3.0 license, which svenjust chose for the repository.
More boards in room-ventilation-system
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
Display eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k