Binary adder

SwiftDust·binary-adder·Schematics/binary_adder.kicad_pcb

Binary adder PCB layout, top view — open source board by SwiftDust

About the Binary adder PCB

Binary adder is an open source PCB design by SwiftDust, published on GitHub. It is a 2-layer board measuring 98 × 51 mm, with 34 components from 8 distinct parts.

Other key parts include the 4040 and LM555XN. By type, the board carries 16 resistors, 12 diodes, 2 ICs, 2 switches, 1 connector and 1 capacitor.

From the project

A binary adder PCB utilising the 555 and CD4060.

This is a simple binary adder in the form of an Airbus Beluga. It is a simple project for me to learn how to use ICs. This is for Resolution Week 3 but a new rule states you can't use monorepos so that's why I made this separate repository.

I used the well-known 555 and CD4060 to make this PCB. I used the 555 in monostable mode with a time constant of 0.125 seconds. This is derived by the fact that the average person would click on a button no more than eight times in a second, so a time constant of 0.125 or lower is required. If we make the time constant too low, it may not be fed correctly…

Binary adder, from the project README
From the project README

Main components on the Binary adder

Binary adder bill of materials (BOM)

34 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
4040
U1
1
LM555XN
LM555xN
U2
1
CONN_01X02
Conn_01x02
J1
2
SW_Push
SW1, SW2
12
LED
D1, D2, D3, D4, D5, D6, D7, D8 +4
1
12.5U
12.5u
C1
4
10K
10k
R1, R2, R15, R16
12
5k
R3, R4, R5, R6, R7, R8, R9, R10 +4

Binary adder design files

The KiCad project lives in the SwiftDust/binary-adder repository on GitHub; these links point at the commit this page was built from.

Binary adder: common questions

How big is the Binary adder PCB?

The Binary adder measures 98 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Binary adder?

34 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Binary adder design files?

From the SwiftDust/binary-adder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Binary adder design in my own project?

The repository has no license, so all rights stay with SwiftDust. Use it as a reference, and ask the author before reusing the design.