Production1
About the Production1 PCB
Production1 is an open source PCB design by switchcraft, published on GitHub. It is a 2-layer board measuring 156 × 80 mm, with 60 components from 18 distinct parts.
Other key parts include the LTS-25-NP and NE5532. By type, the board carries 18 resistors, 15 connectors, 12 capacitors, 6 ICs, 4 diodes and 1 transformer.
From the project
KiCad Project files, schematic files, layout files and netlists
All contributions should adhere to the Kicad library convention, just like the standard KiCad library. See: https://github.com/KiCad/kicad-library/wiki/Kicad-Library-Convention
Main components on the Production1
Production1 bill of materials (BOM)
60 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LTS-25-NP | LTS25-NP | U1, U2, U3 |
| 3 | NE5532 | DIP-8_W7.62mm_LongPads | U4, U5, U6 |
| 5 | CONN_01X03 | MSTBA_25_3p_G_508-1757488 | J1, J2, P5, P6, P10 |
| 6 | CONN_01X02 | MSTBA_25_2p_G_508-1757242 | J3, J4, J5, P4, P11, P20 |
| 1 | CONN_01X04 | MSTBA_25_4p_G_508-1757268 | J6 |
| 1 | CONN_01X04 | PhoenixContact_MSTBA-G_04x5.00mm_Angled | P1 |
| 1 | CONN_01X02 | PhoenixContact_MSTBA-G_02x5.00mm_Angled | P2 |
| 1 | CONN_01X03 | PhoenixContact_MSTBA-G_03x5.00mm_Angled | P3 |
| 3 | POT | Potentiometer_Trimmer_ACP_CA6v_Horizontal | RV1, RV2, RV3 |
| 1 | SemikronSKiiP_13ACM12V18 | SKiiP_13ACM12V18 | T1 |
| 1 | TEST | Pin_Header_Straight_1x01_Pitch2.54mm | TP1 |
| 3 | LED | LED_1206_HandSoldering | D1, D2, D3 |
| 1 | GREEN PWR LED | LED_0805_HandSoldering | D4 |
| 5 | C | C_1206_HandSoldering | C1, C2, C3, C4, C5 |
| 2 | CP | CP_Radial_D5.0mm_P2.50mm | C6, C7 |
| 3 | 10u | C_0805_HandSoldering | C8, C9, C10 |
| 2 | 100n | C_0603 | C11, C12 |
| 18 | R | R_1206_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 +10 |
Production1 design files
The KiCad project lives in the switchcraft/kicad-projects repository on GitHub; these links point at the commit this page was built from.
Production1: common questions
How big is the Production1 PCB?
The Production1 measures 156 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Production1?
60 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Production1 design files?
From the switchcraft/kicad-projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Production1 design in my own project?
The repository has no license, so all rights stay with switchcraft. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-projects
FrontEnd Inverter
210 × 127 mm80 parts4LNo license6
Inverter card 2
215 × 126 mm69 parts4LNo license6
Pre charge controller
126 × 52.2 mm56 parts2LNo license6
Current Sensing Card
95 × 70 mm40 parts2LNo license6
Gate driver
90 × 50 mm33 parts2LNo license6
Main Power Electronics Connection Card (M.P.E.C.C)
154.8 × 75.2 mm25 parts2LNo license6
Voltage Sensor Card
150 × 71 mm23 parts2LNo license6
Inverter card
156 × 80 mm21 parts2LNo license6
Diode Front-End Connector Card
138 × 70 mm19 parts2LNo license6