Rpi i2c fan
szym-mie·rpi_i2c_fan·pcb/rpi_i2c_fan.kicad_pcb
About the Rpi i2c fan PCB
Rpi i2c fan is an open source AVR/Arduino PCB design by szym-mie, published on GitHub under the MIT license. It is a 2-layer board measuring 43.2 × 58.4 mm, with 15 components from 14 distinct parts.
Its main chip is the ATtiny85-20S, from the AVR/Arduino family. By type, the board carries 5 resistors, 3 connectors, 2 transistors, 2 diodes, 2 capacitors and 1 IC.
Main components on the Rpi i2c fan
Rpi i2c fan bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny85-20S | SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | IRLML6346 | SOT-23 | Q1 |
| 1 | 2N7002PS | SOT-363_SC-70-6_Handsoldering | Q2 |
| 1 | RPI_INOUT | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | DPY_OUT | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | FAN_OUT | PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | KPTB-1612 | LED_Kingbright_KPBD-3224 | D1 |
| 1 | SK34 | D_SMA_Handsoldering | D2 |
| 1 | 100u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Rpi i2c fan design files
The KiCad project lives in the szym-mie/rpi_i2c_fan repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/rpi_i2c_fan.kicad_pcb
- Schematicpcb/rpi_i2c_fan.kicad_sch
Rpi i2c fan: common questions
What microcontroller does the Rpi i2c fan use?
The Rpi i2c fan is built around the ATtiny85-20S, from the AVR/Arduino family.
How big is the Rpi i2c fan PCB?
The Rpi i2c fan measures 43.2 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rpi i2c fan?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rpi i2c fan design files?
From the szym-mie/rpi_i2c_fan repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rpi i2c fan design in my own project?
Yes, under the terms of its MIT license, which szym-mie chose for the repository.
Can I test firmware for the Rpi i2c fan without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k