T dsp tac5212 audio shield adaptor

t-dsp·t-dsp_tac5212_audio_shield_adaptor

T dsp tac5212 audio shield adaptor layout, top view — open source NXP board by t-dsp

About the T dsp tac5212 audio shield adaptor

T dsp tac5212 audio shield adaptor is an open source NXP PCB design by t-dsp, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 26.5 × 61 mm, with 30 components from 11 distinct parts.

Its main chip is the 0.1uF, from the NXP family. By type, the board carries 9 resistors, 6 diodes, 6 inductors, 6 capacitors and 2 microphones.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

Open-source Teensy Audio Shield adaptor using the TAC5212 pro audio codec — line in/out, dual MEMS mics, USB Host

Part of the T-DSP open modular audio platform.

A compact carrier board (60.93mm × 26.46mm) that connects a T-DSP TAC5212 audio module and a Teensy 4.1 together into a simple, USB-powered Teensy audio shield — with stereo line in/out, two onboard PDM MEMS microphones, USB Host, and SD card access.

View 3D Render Gallery -- interactive slideshow of all board views

T dsp tac5212 audio shield adaptor, from the project README
From the project README

T dsp tac5212 audio shield adaptor bill of materials (BOM)

30 components, 11 distinct parts.

QtyPartRefs
2
MSM261DGT003
MK1, MK2
1
USB A Host - TE 292303-5
USBA1
6
ESD DIODE
D6, D7, D8, D9, D10, D11
6
600Ω@100MHz
FB1, FB2, FB3, FB4, FB5, FB6
1
1 uF
C1
2
470 uF Electrolytic Audio-Grade
C7, C9
2
0.1uF
C10, C40
1
08055C104M4T4A
10 uF
Kyocera AVX
C33
6
49.9 ohm
R3, R6, R9, R55, R56, R57
1
10k
R11
2
2.21k
R13, R14

T dsp tac5212 audio shield adaptor design files

The KiCad project lives in the t-dsp/t-dsp_tac5212_audio_shield_adaptor repository on GitHub; these links point at the commit this page was built from.

T dsp tac5212 audio shield adaptor: common questions

What microcontroller does the T dsp tac5212 audio shield adaptor use?

The T dsp tac5212 audio shield adaptor is built around the 0.1uF, from the NXP family.

How big is the T dsp tac5212 audio shield adaptor?

The T dsp tac5212 audio shield adaptor measures 26.5 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the T dsp tac5212 audio shield adaptor?

30 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the T dsp tac5212 audio shield adaptor design files?

From the t-dsp/t-dsp_tac5212_audio_shield_adaptor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the T dsp tac5212 audio shield adaptor design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the T dsp tac5212 audio shield adaptor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards