LedCubeNoDynamic
t0tten·LedCubeNoDynamic·Schematics/RGBLedCube.kicad_pcb
About the LedCubeNoDynamic PCB
LedCubeNoDynamic is an open source AVR/Arduino PCB design by t0tten, published on GitHub. It is a 2-layer board measuring 216.4 × 127 mm, with 67 components from 5 distinct parts.
Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the 74HC595. By type, the board carries 25 ICs, 25 connectors, 8 transistors, 8 resistors and 1 module.
Main components on the LedCubeNoDynamic
LedCubeNoDynamic bill of materials (BOM)
67 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 25 | 74HC595 | DIP-16_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8 +17 |
| 1 | Arduino_Nano_v2.x | Arduino_Nano | A1 |
| 8 | BC557 | TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 25 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 +17 |
| 8 | R | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
LedCubeNoDynamic design files
The KiCad project lives in the t0tten/LedCubeNoDynamic repository on GitHub; these links point at the commit this page was built from.
LedCubeNoDynamic: common questions
What microcontroller does the LedCubeNoDynamic use?
The LedCubeNoDynamic is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.
How big is the LedCubeNoDynamic PCB?
The LedCubeNoDynamic measures 216.4 × 127 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LedCubeNoDynamic?
67 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the LedCubeNoDynamic design files?
From the t0tten/LedCubeNoDynamic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LedCubeNoDynamic design in my own project?
The repository has no license, so all rights stay with t0tten. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LedCubeNoDynamic without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k