Trial project spo2

tahirozkurkculer·trial_project_spo2

Trial project spo2 PCB layout, top view — open source AVR/Arduino board by tahirozkurkculer

About the Trial project spo2 PCB

Trial project spo2 is an open source AVR/Arduino PCB design by tahirozkurkculer, published on GitHub. It is a 2-layer board measuring 87 × 53 mm, with 10 components from 5 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the MAX30102 and SSD1306. By type, the board carries 4 resistors, 3 capacitors, 2 ICs and 1 module.

From the project

first project by using git and project for learning KiCAD more

Main components on the Trial project spo2

Trial project spo2 bill of materials (BOM)

10 components, 5 distinct parts.

QtyPartRefs
1
MAX30102
U1
1
SSD1306
U2
1
Arduino_Nano_v3.x
A1
3
100n
C1, C2, C3
4
1K
R1, R2, R3, R4

Trial project spo2 design files

The KiCad project lives in the tahirozkurkculer/trial_project_spo2 repository on GitHub; these links point at the commit this page was built from.

Trial project spo2: common questions

What microcontroller does the Trial project spo2 use?

The Trial project spo2 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Trial project spo2 PCB?

The Trial project spo2 measures 87 × 53 mm, has 2 copper layers and is 1.600198 mm thick.

How many components are on the Trial project spo2?

10 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Trial project spo2 design files?

From the tahirozkurkculer/trial_project_spo2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Trial project spo2 design in my own project?

The repository has no license, so all rights stay with tahirozkurkculer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Trial project spo2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards