Base

taikiishii·microbit_raygun·pcb/base/base.kicad_pcb

Base PCB layout, top view — open source board by taikiishii

About the Base PCB

Base is an open source PCB design by taikiishii, published on GitHub under the MIT license. It is a 2-layer board measuring 84 × 90 mm, with 50 components from 5 distinct parts.

Other key parts include the usb-c. By type, the board carries 30 connectors, 10 ICs and 10 transformers.

It belongs with the displays & leds designs in this gallery.

From the project

micro:bit と赤外線で遊ぶ射的ゲーム。KiCad 基板・3D プリントデータ・MakeCode コード一式

micro:bit と赤外線を使った射的ゲームです。銃・的・得点表示のすべてを micro:bit で組み、 基板は KiCad、筐体は 3D プリンタで自作できます。

- 銃 … トリガーを引くと赤外線(NEC)を発射。バレル内のモーターが振動して反動を演出します。 - 的 … 赤外線を受信すると NeoPixel が撃った人の色に光り、サーボで的が倒れます。 - 得点表示 … 無線で命中を受け取り、MAX7219 ドットマトリクスに得点を表示。25 秒の時間制限つき。

- ゲームの流れ - システム構成 - BOM(部品表) - 基板 (KiCad) - 3D プリント部品 - 必要な道具 - 組み立て - ソフトウェアの書き込み - カスタマイズ - イベントでの運用 - ライセンス

1. 得点表示 micro:bit の電源を入れると開始音(ソ・ソ・ソ・ド)が鳴り、ゲーム開始。 2. 25 秒間、LED マトリクスに得点、micro:bit の 5×5 LED に残り時間が渦巻き状に表示されます。 3. 銃のトリガーを引くと赤外線が発射され、micro:bit の LED にビーム状のアニメーションが出ます。 4. 的に命中すると NeoPixel リングが撃った人の色に光り、ブザーが鳴ってサーボが的を倒します。 5. 0〜3…

Base, from the project README
From the project README

Main components on the Base

Base bill of materials (BOM)

50 components, 5 distinct parts.

QtyPartRefs
10
usb-c
u1, u2, u3, u4, u5, u6, u7, u8 +2
10
servo
J1, J4, J7, J10, J13, J16, J19, J22 +2
10
dcdc
J2, J5, J8, J11, J14, J17, J20, J23 +2
10
target
J3, J6, J9, J12, J15, J18, J21, J24 +2
10
battery
T1, T2, T3, T4, T5, T6, T7, T8 +2

Base design files

The KiCad project lives in the taikiishii/microbit_raygun repository on GitHub; these links point at the commit this page was built from.

Base: common questions

How big is the Base PCB?

The Base measures 84 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Base?

50 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Base design files?

From the taikiishii/microbit_raygun repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Base design in my own project?

Yes, under the terms of its MIT license, which taikiishii chose for the repository.

More boards in microbit_raygun

Similar boards