Target
taikiishii·microbit_raygun·pcb/target/target.kicad_pcb
About the Target PCB
Target is an open source PCB design by taikiishii, published on GitHub under the MIT license. It is a 2-layer board measuring 52 × 90 mm, with 6 components from 6 distinct parts.
By type, the board carries 5 connectors and 1 IC.
It belongs with the displays & leds designs in this gallery.
From the project
micro:bit と赤外線で遊ぶ射的ゲーム。KiCad 基板・3D プリントデータ・MakeCode コード一式
micro:bit と赤外線を使った射的ゲームです。銃・的・得点表示のすべてを micro:bit で組み、 基板は KiCad、筐体は 3D プリンタで自作できます。
- 銃 … トリガーを引くと赤外線(NEC)を発射。バレル内のモーターが振動して反動を演出します。 - 的 … 赤外線を受信すると NeoPixel が撃った人の色に光り、サーボで的が倒れます。 - 得点表示 … 無線で命中を受け取り、MAX7219 ドットマトリクスに得点を表示。25 秒の時間制限つき。
- ゲームの流れ - システム構成 - BOM(部品表) - 基板 (KiCad) - 3D プリント部品 - 必要な道具 - 組み立て - ソフトウェアの書き込み - カスタマイズ - イベントでの運用 - ライセンス
1. 得点表示 micro:bit の電源を入れると開始音(ソ・ソ・ソ・ド)が鳴り、ゲーム開始。 2. 25 秒間、LED マトリクスに得点、micro:bit の 5×5 LED に残り時間が渦巻き状に表示されます。 3. 銃のトリガーを引くと赤外線が発射され、micro:bit の LED にビーム状のアニメーションが出ます。 4. 的に命中すると NeoPixel リングが撃った人の色に光り、ブザーが鳴ってサーボが的を倒します。 5. 0〜3…

Target bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | microbit_holes | u1 |
| 1 | neopixel | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | servo | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | sensor | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | 3V | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | J5 |
Target design files
The KiCad project lives in the taikiishii/microbit_raygun repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/target/target.kicad_pcb
- Schematicpcb/target/target.kicad_sch
Target: common questions
How big is the Target PCB?
The Target measures 52 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Target?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Target design files?
From the taikiishii/microbit_raygun repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Target design in my own project?
Yes, under the terms of its MIT license, which taikiishii chose for the repository.
More boards in microbit_raygun
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k