Ha light sensor
Tailslide·ha_light_sensor·kicad/WakeCircuit/WakeCircuit.kicad_pcb
About the Ha light sensor PCB
Ha light sensor is an open source PCB design by Tailslide, published on GitHub. It is a 2-layer board measuring 34 × 21.3 mm, with 16 components from 13 distinct parts.
Other key parts include the TLV7011DBVR and CD4013BPW. By type, the board carries 5 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
An ESP32-based mouse trap monitoring system that integrates with Home Assistant via MQTT. The system uses light-dependent resistors (LDRs) to detect both the trap state (triggered/ready) and battery status (ok/low), providing real-time updates to your Home Assistant instance.
An ESP32-based mouse trap monitoring system that integrates with Home Assistant via MQTT. The system uses light-dependent resistors (LDRs) to detect both the trap state (triggered/ready) and battery status (ok/low), providing real-time updates to your Home Assistant instance.
- Monitors mouse trap state (triggered/ready) using an LDR sensor - Monitors battery status (ok/low) using a second LDR sensor - Optional external wake circuit support for immediate trap detection - Integrates with Home Assistant via MQTT - Power-efficient design with deep sleep between readings - 24-hour heartbeat…
Main components on the Ha light sensor
Ha light sensor bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV7011DBVR | SOT_1DBVR_TEX | U1 |
| 1 | CD4013BPW 4013 | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | BCS-112-L-S-TE Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | BCS-110-L-S-TE Conn_01x10_Socket | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | S3B-PH-K(LF)(SN) Conn_01x03_Socket | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J4 |
| 1 | 3214J-1-103E 10K | Potentiometer_Bourns_3214J_Horizontal | RV1 |
| 1 | 1N4148W-7-F 1N4148 | D_SOD-123F | D1 |
| 2 | CC0805KKX7R0BB104 100nF | C_0805_2012Metric | C1, C3 |
| 1 | TAJA226K010RNJ 22uF | CP_EIA-3216-18_Kemet-A | C2 |
| 1 | CL21A106MPFNNNE 10uF | C_0805_2012Metric | C4 |
| 3 | RC0805FR-0710KL 10K | R_0805_2012Metric | R1, R3, R4 |
| 1 | RC0805FR-072M2L 2.2M | R_0805_2012Metric | R2 |
| 1 | RC0805FR-071K2L 1.2K | R_0805_2012Metric | R5 |
Ha light sensor design files
The KiCad project lives in the Tailslide/ha_light_sensor repository on GitHub; these links point at the commit this page was built from.
Ha light sensor: common questions
How big is the Ha light sensor PCB?
The Ha light sensor measures 34 × 21.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ha light sensor?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ha light sensor design files?
From the Tailslide/ha_light_sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ha light sensor design in my own project?
The repository has no license, so all rights stay with Tailslide. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k