HardLabs

Duel Mux

TallesSantosCUBoulder·EIT-Capstone-Project-2023·PCBs/Duel_Mux/Duel_Mux.kicad_pcb

Duel Mux PCB layout, top view — open source board by TallesSantosCUBoulder

About the Duel Mux PCB

Duel Mux is an open source PCB design by TallesSantosCUBoulder, published on GitHub under the MIT license. It is a 2-layer board measuring 96 × 62.5 mm, with 8 components from 5 distinct parts.

Other key parts include the ADG406BNZ. By type, the board carries 6 connectors and 2 ICs.

From the project

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

First Year Team: Diego Sena, Keegan Erickson, Jonathan Keleppinger

Duel Mux, from the project README
From the project README

Main components on the Duel Mux

ADG406BNZ

Duel Mux bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
2
ADG406BNZ
U1, U2
2
Conn_01x08_Pin
J1, J4
1
Conn_01x03_Pin
J2
1
Conn_01x02_Pin
J3
2
DB-9_Female
J5, J6

Duel Mux design files

The KiCad project lives in the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub; these links point at the commit this page was built from.

Duel Mux: common questions

How big is the Duel Mux PCB?

The Duel Mux measures 96 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Duel Mux?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Duel Mux design files?

From the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Duel Mux design in my own project?

Yes, under the terms of its MIT license, which TallesSantosCUBoulder chose for the repository.

More boards in EIT-Capstone-Project-2023