HardLabs

Power Breakout

TallesSantosCUBoulder·EIT-Capstone-Project-2023·PCBs/Breakout_Boards/Power_Breakout/Power_Breakout.kicad_pcb

Power Breakout layout, top view — open source board by TallesSantosCUBoulder

About the Power Breakout

Power Breakout is an open source PCB design by TallesSantosCUBoulder, published on GitHub under the MIT license. It is a 2-layer board measuring 15.8 × 51.6 mm, with 6 components from 2 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

First Year Team: Diego Sena, Keegan Erickson, Jonathan Keleppinger

Power Breakout, from the project README
From the project README

Power Breakout bill of materials (BOM)

6 components, 2 distinct parts.

QtyPartRefs
3
Conn_01x01_Pin
J1, J2, J3
3
Conn_01x16_Pin
J4, J5, J6

Power Breakout design files

The KiCad project lives in the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub; these links point at the commit this page was built from.

Power Breakout: common questions

How big is the Power Breakout?

The Power Breakout measures 15.8 × 51.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power Breakout?

6 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Power Breakout design files?

From the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Power Breakout design in my own project?

Yes, under the terms of its MIT license, which TallesSantosCUBoulder chose for the repository.

More boards in EIT-Capstone-Project-2023

Similar boards