HardLabs

Electrode Select Breakout

TallesSantosCUBoulder·EIT-Capstone-Project-2023·PCBs/Breakout_Boards/Electrode_Select_Breakout/Electrode_Select_Breakout.kicad_pcb

Electrode Select Breakout layout, top view — open source board by TallesSantosCUBoulder

About the Electrode Select Breakout

Electrode Select Breakout is an open source PCB design by TallesSantosCUBoulder, published on GitHub under the MIT license. It is a 2-layer board measuring 36.3 × 46.2 mm, with 3 components from 2 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

This repository was created for the Electrical Impedance Tomography (EIT) Senior Design Project. The goals of this project were to make open-source hardware and software to reduce the cost of EIT in medical imaging.

First Year Team: Diego Sena, Keegan Erickson, Jonathan Keleppinger

Electrode Select Breakout, from the project README
From the project README

Electrode Select Breakout bill of materials (BOM)

3 components, 2 distinct parts.

QtyPartRefs
2
Conn_01x08_Socket
J1, J3
1
2xRJ_45
J2

Electrode Select Breakout design files

The KiCad project lives in the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub; these links point at the commit this page was built from.

Electrode Select Breakout: common questions

How big is the Electrode Select Breakout?

The Electrode Select Breakout measures 36.3 × 46.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Electrode Select Breakout?

3 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Electrode Select Breakout design files?

From the TallesSantosCUBoulder/EIT-Capstone-Project-2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Electrode Select Breakout design in my own project?

Yes, under the terms of its MIT license, which TallesSantosCUBoulder chose for the repository.

More boards in EIT-Capstone-Project-2023

Similar boards