HardLabs

Split mini top

tamago324·split-mini·rev0.7/split-mini/split-mini__top.kicad_pcb

Split mini top PCB layout, top view — open source board by tamago324
Simulate this board

About the Split mini top PCB

Split mini top is an open source PCB design by tamago324, published on GitHub. It is a 2-layer board measuring 97.1 × 87.4 mm, with 18 components from 1 distinct parts.

It belongs with the keyboards designs in this gallery.

From the project

36 key split keyboard

XIAO RP2040 を使用 KLE https://kbplate.ai03.com/ でプレートデータを作成 width: 16.5 height: 17.5 左右分割キーボード 狭ピッチ キーキャップは専用のものを使う (底面が16mmのやつを使うことにする) MX 対応 100mmx100mm以下のため、Elecrow で1ドルで発注可能 PCB、トッププレート1つ、ボトムプレートの3つを3ドルで発注できて、2セット組み立てられる QMK firmware

Split mini top bill of materials (BOM)

18 components, 1 distinct parts.

QtyPartRefs
18
SW_PUSH
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +10

Split mini top design files

The KiCad project lives in the tamago324/split-mini repository on GitHub; these links point at the commit this page was built from.

Split mini top: common questions

How big is the Split mini top PCB?

The Split mini top measures 97.1 × 87.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Split mini top?

18 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Split mini top design files?

From the tamago324/split-mini repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Split mini top design in my own project?

The repository has no license, so all rights stay with tamago324. Use it as a reference, and ask the author before reusing the design.

More boards in split-mini

Similar boards