HardLabs

Split mini top 2

tamago324·split-mini·rev0.03/split-mini/split-mini_top__2.kicad_pcb

Split mini top 2 PCB layout, top view — open source board by tamago324
Simulate this board

About the Split mini top 2 PCB

Split mini top 2 is an open source PCB design by tamago324, published on GitHub. It is a 2-layer board measuring 15.4 × 15.4 mm, with 3 components from 1 distinct parts.

It belongs with the keyboards designs in this gallery.

From the project

36 key split keyboard

XIAO RP2040 を使用 KLE https://kbplate.ai03.com/ でプレートデータを作成 width: 16.5 height: 17.5 左右分割キーボード 狭ピッチ キーキャップは専用のものを使う (底面が16mmのやつを使うことにする) MX/Choc 対応 100mmx100mm以下のため、Elecrow で1ドルで発注可能 PCB、トッププレート2つ、ボトムプレートの4つを4ドルで発注できて、2セット組み立てられる QMK firmware

Split mini top 2, from the project README
From the project README

Split mini top 2 bill of materials (BOM)

3 components, 1 distinct parts.

QtyPartRefs
3
SW_PUSH
SW16, SW17, SW18

Split mini top 2 design files

The KiCad project lives in the tamago324/split-mini repository on GitHub; these links point at the commit this page was built from.

Split mini top 2: common questions

How big is the Split mini top 2 PCB?

The Split mini top 2 measures 15.4 × 15.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Split mini top 2?

3 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Split mini top 2 design files?

From the tamago324/split-mini repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Split mini top 2 design in my own project?

The repository has no license, so all rights stay with tamago324. Use it as a reference, and ask the author before reusing the design.

More boards in split-mini

Similar boards