Optical heartbeat

TANACHAT007·optical-heartbeat·07_pcb/kicad/heartbeat.kicad_sch

This repository ships a schematic but no board layout.

About the Optical heartbeat PCB

Optical heartbeat is an open source AVR/Arduino PCB design by TANACHAT007, published on GitHub. It is a board, with 21 components from 17 distinct parts.

Its main chip is the Arduino Leonardo (5V GND A0 D9 D2 D3), from the AVR/Arduino family. Other key parts include the LM358. By type, the board carries 8 resistors, 6 capacitors, 2 transistors, 2 connectors, 1 IC and 1 diode.

From the project

Mini-project 1/2026 — วัดชีพจรด้วยแสงอินฟราเรด (IR LED + phototransistor → LM358 → Arduino A0) ใช้เฉพาะอุปกรณ์ในกล่องยืม

Mini-project 1/2026 — วัดชีพจรด้วยแสงอินฟราเรด (IR LED + phototransistor → LM358 → Arduino A0) ใช้เฉพาะอุปกรณ์ในกล่องยืม

- 08firmware/ — โค้ด Arduino (Leonardo/UNO), ตารางต่อสาย READMEwiring.md, บันทึกการทดสอบจริง BRINGUP.md, โปรแกรมวินิจฉัย diag/ d9test/ และกราฟสด liveplot.py - 07pcb/kicad/ — สคีแมติก KiCad (ERC ผ่าน ไม่มี error) พร้อม netlist และ BOM - 10manual/ — รูปต่อ breadboard ทีละขั้น (step1-7.png), สคีแมติก, ผลจำลอง และสคริปต์ที่สร้างรูปทั้งหมด - 02design/model.py, 04printstl/, 06cadexport/ — เคส (ฐาน + ฝา) สร้างจาก Fusion 360

Main components on the Optical heartbeat

Optical heartbeat bill of materials (BOM)

21 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM358
U1
1
BC548
Q1
1
Phototransistor 940nm
Q2
1
Arduino Leonardo (5V GND A0 D9 D2 D3)
J1
1
OLED 0.96in I2C (GND VCC SCL SDA)
J2
1
100k
RV1
1
IR LED 940nm
D1
2
10uF
C1, C6
1
10nF
C2
1
470nF
C3
1
100nF
C4
1
100uF
C5
3
10k
R1, R5, R6
2
100k
R2, R4
1
2.4k
R3
1
1k
R7
1
220
R8

Optical heartbeat design files

The KiCad project lives in the TANACHAT007/optical-heartbeat repository on GitHub; these links point at the commit this page was built from.

Optical heartbeat: common questions

What microcontroller does the Optical heartbeat use?

The Optical heartbeat is built around the Arduino Leonardo (5V GND A0 D9 D2 D3), from the AVR/Arduino family.

How many components are on the Optical heartbeat?

21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Optical heartbeat design files?

From the TANACHAT007/optical-heartbeat repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Optical heartbeat design in my own project?

The repository has no license, so all rights stay with TANACHAT007. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Optical heartbeat without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards