ECE445L Lab5
tanai-prathapam·lab5_445L_personal·hw/ECE445L_Lab5/Lab5_Circuit.kicad_pcb
About the ECE445L Lab5 PCB
ECE445L Lab5 is an open source PCB design by tanai-prathapam, published on GitHub. It is a 2-layer board measuring 114.3 × 88.9 mm, with 23 components from 14 distinct parts.
Other key parts include the LP-MSPM0G3507, MCP4921-E/P, LM4890, Adafruit ST7735R and LM4041C12ILP. By type, the board carries 8 resistors, 5 ICs, 4 switches, 4 capacitors, 1 connector and 1 diode.
From the project
For 319K/445L Lab 6 or 7, use the marked file. Otherwise use ECE445L_Starter.
Main components on the ECE445L Lab5
ECE445L Lab5 bill of materials (BOM)
23 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP-MSPM0G3507 Texas Instruments | ti_LP_MSPM0G3507 | U1 |
| 1 | MCP4921-E/P Microchip Technology | DIP-8_W7.62mm_LongPads | U2 |
| 1 | LM4890 TI | SOIC127P600X175-8N | U3 |
| 1 | Adafruit ST7735R Adafruit | adafruit_st7735r2 | U4 |
| 1 | LM4041C12ILP Texas Instruments | ti_LM4041CILPR | U5 |
| 1 | Speaker | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 4 | Input | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 1 | Output | LED_D5.0mm | D1 |
| 3 | 0.1uF | C_Radial_100mil | C1, C2, C4 |
| 1 | 1uF | CP_Radial_Tantal200mil | C3 |
| 5 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R7 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8 |
ECE445L Lab5 design files
The KiCad project lives in the tanai-prathapam/lab5_445L_personal repository on GitHub; these links point at the commit this page was built from.
ECE445L Lab5: common questions
How big is the ECE445L Lab5 PCB?
The ECE445L Lab5 measures 114.3 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE445L Lab5?
23 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ECE445L Lab5 design files?
From the tanai-prathapam/lab5_445L_personal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ECE445L Lab5 design in my own project?
The repository has no license, so all rights stay with tanai-prathapam. Use it as a reference, and ask the author before reusing the design.
More boards in lab5_445L_personal
Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0ECE 319K Baseline Project
tanai-prathapam
114.3 × 88.9 mm40 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0- schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0 ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0Lab4 Circuit
tanai-prathapam
114.3 × 88.9 mm16 parts2LNo license0Lab3 Circuit
tanai-prathapam
114.3 × 88.9 mm16 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ECE445L Lab2
tanai-prathapam
114.3 × 88.9 mm12 parts2LNo license0ECE445L Lab1
tanai-prathapam
114.3 × 88.9 mm5 parts2LNo license0