46 open source boards using the Adafruit ST7735R

Real designs built with the Adafruit ST7735R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

46 boardsClear filters|Most starred

How designs wire the Adafruit ST7735R

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the Adafruit ST7735R connects to, and the resistors, capacitors and other passives placed on it.

  • The LITE pin is tied to 3.3V on 12 of 14 designs (GND on 2).
GNDpin 1Connected to: GND 86%
VCCpin 2Connected to: 3.3V 86%
LITEpin 10Connected to: 3.3V 86%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include POV-Globe by Mikail-Sadic-UT, CrickHit by devanshjoshi08, KeyboardPCB by MaprilBear and ECE 319K Baseline Project by Andres-Wearden.

The Adafruit ST7735R in open source designs

The gallery holds 46 open source boards using the Adafruit ST7735R from 16 GitHub repositories; a typical one measures about 114.4 × 88.9 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 2% carry an open source license.

The most starred is POV-Globe by Mikail-Sadic-UT.

Microcontrollers on boards using the Adafruit ST7735R

What boards using the Adafruit ST7735R are built for

Adafruit ST7735R: common questions

Where can I find a Adafruit ST7735R reference design?

Each of the 46 boards on this page is a real design using the Adafruit ST7735R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Adafruit ST7735R LITE pin connected?

The LITE pin is tied to 3.3V on 12 of 14 designs (GND on 2). Counted from the KiCad layouts of 14 open source designs using the Adafruit ST7735R.

What parts are used alongside the Adafruit ST7735R?

The LP2950-33LPRE3, MCP34119P, TM4C123GH6PMIR, HiLetGo_ST7735R and LP-MSPM0G3507 appear in the most repositories here.

Which microcontrollers do boards using the Adafruit ST7735R use?

Most are built on ESP8266 (16), ESP32 (2) and Silicon Labs (2).

How big is a typical board using the Adafruit ST7735R?

The median is 114.4 × 88.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the Adafruit ST7735R?

By GitHub stars, POV-Globe by Mikail-Sadic-UT, with 40 stars.

Can I simulate one of these boards using the Adafruit ST7735R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part