24 open source boards using the LP-MSPM0G3507

Real designs built with the LP-MSPM0G3507, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the LP-MSPM0G3507

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LP-MSPM0G3507 connects to, and the resistors, capacitors and other passives placed on it.

  • The PA9/PB23 pin is left unconnected on 13 of 13 designs.
  • The PB24 pin is left unconnected on 13 of 13 designs.
  • The TARGETRST pin is left unconnected on 13 of 13 designs.
  • The PB19 pin is left unconnected on 13 of 13 designs.
+3.3Vpin J1_1Connected to: 3.3V 92%
PA25pin J1_2Connected to: Not connected 92%
PA9/PB23pin J1_3Connected to: Not connected 100%
PA26pin J1_5Connected to: Not connected 85% · a signal 15%
PB24pin J1_6Connected to: Not connected 100%
PA27pin J1_8Connected to: Not connected 85% · a signal 15%
PB2pin J1_9Connected to: Not connected 85% · a signal 15%
PB3pin J1_10Connected to: Not connected 85% · a signal 15%
GNDpin J2_1, J3_2Connected to: GND 96%
PB12pin J2_2Connected to: Not connected 92%
PB17pin J2_3Connected to: Not connected 92%
TARGETRSTpin J2_5Connected to: Not connected 100%
PB0pin J2_9Connected to: Not connected 85% · a signal 15%
PB16pin J2_10Connected to: Not connected 92%
+VBUSpin J3_1Connected to: 5V 100%
PB19pin J3_3Connected to: Not connected 100%
PB18pin J3_5Connected to: Not connected 85% · a signal 15%
PA18pin J3_6Connected to: Not connected 92%
PA24pin J3_7Connected to: Not connected 92%
PA17pin J3_8Connected to: Not connected 85% · a signal 15%
PA16pin J3_9Connected to: Not connected 85% · a signal 15%
PA15pin J3_10Connected to: Not connected 92%
PB4pin J4_1Connected to: Not connected 85% · a signal 15%
PB1pin J4_2Connected to: Not connected 85% · a signal 15%
PA28pin J4_3Connected to: Not connected 92%
PA31pin J4_4Connected to: Not connected 100%
PB13pin J4_6Connected to: Not connected 100%
PA10pin J4_7Connected to: Not connected 100%
PA11pin J4_8Connected to: Not connected 100%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CrickHit by devanshjoshi08, CapstonePCB by MilesMayhew, ECE 319K Baseline Project by Andres-Wearden and ECE 319K Baseline Project by DylanMeeks.

The LP-MSPM0G3507 in open source designs

The gallery holds 24 open source boards using the LP-MSPM0G3507 from 13 GitHub repositories; a typical one measures about 114.3 × 88.9 mm and carries around 40 components.

100% are two-layer designs, the rest use four layers or more, and 4% carry an open source license.

The most starred is PCBRev2 by MilesMayhew.

LP-MSPM0G3507: common questions

Where can I find a LP-MSPM0G3507 reference design?

Each of the 24 boards on this page is a real design using the LP-MSPM0G3507. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LP-MSPM0G3507 PA9/PB23 pin connected?

The PA9/PB23 pin is left unconnected on 13 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the LP-MSPM0G3507.

How is the LP-MSPM0G3507 PB24 pin connected?

The PB24 pin is left unconnected on 13 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the LP-MSPM0G3507.

How is the LP-MSPM0G3507 TARGETRST pin connected?

The TARGETRST pin is left unconnected on 13 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the LP-MSPM0G3507.

What parts are used alongside the LP-MSPM0G3507?

The MCP34119P, Adafruit ST7735R, HiLetGo_ST7735R, LM2937xMP and TLV5616CP appear in the most repositories here.

How big is a typical board using the LP-MSPM0G3507?

The median is 114.3 × 88.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the LP-MSPM0G3507?

By GitHub stars, PCBRev2 by MilesMayhew, with 1 stars.

Can I simulate one of these boards using the LP-MSPM0G3507 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part